Dynamic Mechanical Properties of Fused Deposition Modelling Processed Polyphenylsulfone Material
Journal Title: American Journal of Engineering and Applied Sciences - Year 2016, Vol 9, Issue 1
Abstract
Dynamic Mechanical Properties of Fused Deposition Modelling Processed Polyphenylsulfone Material Bolin Huang, S.H. Masood, Mostafa Nikzad, Prabhu Raja Venugopal and Adhiyamaan Arivazhagan DOI : 10.3844/ajeassp.2016.1.11 American Journal of Engineering and Applied Sciences Volume 9, Issue 1 Pages 1-11 Abstract Fused Deposition Modelling (FDM) has attained its reputation due to the capability of rapidly fabricating prototypes from concept design to real parts in shorter time and lower cost than traditional manufacturing processes. This study sheds light on the dynamic mechanical properties of Polyphenylsulfone (PPSF) material fabricated by FDM additive manufacturing process considering the effect of its various process parameters. Three major FDM process parameters are considered in this study, namely, raster angle, raster width and build style. Dynamic Mechanical Analysis is carried out with sweeping temperature at three different fixed frequencies, e.g., 1 Hz, 50 Hz and 100 Hz. Taguchi method is employed for the optimization of process parameters towards achieving better damping properties. Experimental results such as maximum storage modulus, maximum loss modulus, peak of Tan Delta and maximum complex viscosity are captured and the effects of process parameters on these damping properties of PPSF samples are investigated. Copyright © 2016 Bolin Huang, S.H. Masood, Mostafa Nikzad, Prabhu Raja Venugopal and Adhiyamaan Arivazhagan. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited. http://thescipub.com/abstract/10.3844/ajeassp.2016.1.11
Authors and Affiliations
Bolin Huang, S. H. Masood, Mostafa Nikzad, Prabhu Raja Venugopal, Adhiyamaan Arivazhagan
Keywords
Related Articles
- EP ID EP203912
- DOI 10.3844/ajeassp.2016.1.11
- Views 125
- Downloads 0
The Effect of Vessel Speed on Fuel Consumption and Exhaust Gas Emissions
Abstract High consumption of fuel and emissions from ships has brought a new perspective tospeed optimization of ship. The reducing in fuel consumption can provide higher savings on the total cost of the vessel. Some re...
Optimization of a Combined Approach for the Treatment of Carbide Slurry and Capture of CO2
Abstract The aim of this study is to evaluate the potential use of electrocoagulation in the treatment of carbide slurry, a wastewater generated during the production of acetylene, and in the capture of carbon dioxide....
Biodegradation of BTEX: Optimization through Response Surface Methodology
Abstract Response Surface Methodology (RSM) was used to optimize the biodegradation of Benzene, Toluene, Ethyl benzene and m-, o-, p-Xylene (BTEX) by Pseudomonas putida immobilized in PVA matrices in a specially-designe...
Finite-Element Numerical Simulation of the Bending Performance of Post-Tensioned Structural Glass Beams with Adhesively Bonded CFRP Tendons
Abstract In this study, a Finite-Element (FE) numerical investigation is carried out on laminated glass beams with Carbon Fibre Reinforced Polymer (CFRP) adhesively bonded post-tensioning tendons. Taking advantage of pa...
Probabilistic Seismic Hazard Deaggregation for Karaj City (Iran)
Abstract In this study the results of PSHA deaggregation for 5%-damped 0.2, 0.5, 2 and 4 s spectral accelerations, corresponding to Mean Return Periods (MRPs) of 50 and 475 yr for Karaj city was presented. The aim of th...