Dynamic Response of Wire Rope Tension Balancing Device for Ultra-deep Mine Hoisting
Journal Title: 河南科技大学学报（自然科学版） - Year 2016, Vol 37, Issue 1
Abstract
In order to explore the dynamic response under different excitation of tension balancing device for ultra-deep mine hoisting,in view of the pipeline pressure loss and leakage,the dynamic model in the hoisting process was established. The effect of wire rope longitudinal vibration and change of layered winding on the rope length was simulated by the sinusoidal signal and step signal,and the dynamic response of tension balancing device under two excitation was attained. The results show that when the combination of vibration amplitude and frequency is( 0. 10 m,0. 80 Hz),( 0. 18 m,0. 63 Hz) and( 0. 24 m,0. 57 Hz),the maximum of tension difference on the wire rope is almost 10% of the initial average tension with no vibration,which conforms with the coal mine safety regulation. When the length change incurred by wire rope in layered winding is less than 0. 10 m,the maximum difference of tension can be controlled within the range of safety hoisting by the tension balancing device.
Authors and Affiliations
Haoliang FENG, Wei MA, Jishun LI, Shengyong ZOU, Yujun XUE
Keywords
Related Articles
- EP ID EP459897
- DOI 10.15926/j.cnki.issn1672-6871.2016.01.003
- Views 84
- Downloads 0
Development of Fault Diagnosis System for Automatic Lubrication of Power Flat Transport
In view of the shortcomings of the existing automatic lubrication system,such as high failure rate and backward diagnosis technology,a fault diagnosis method of lubrication system based on fault tree analysis combined wi...
Stability of SEIR Model with Saturated Incidence Rate
The stability of susceptible-exposed-infectious-recovered( SEIR) model with vertical transmission and saturated incidence rate was discussed,and the effect of vaccination on transmission of infectious disease was conside...
Effect of Borax on Moisture Absorption and Slag Removal of Sintered Stainless Steel Flux
The stainless steel sintered flux containing borax was prepared by adding borax to the formula of austenitic stainless steel sintering flux, and the welding was carried out on austenitic stainless steel. The moisture abs...
Effects of Diesel Oxidation Catalyst on Particulates Emission from Diesel Engine
In order to study the effects of diesel oxidation catalyst( DOC) on the characteristics of particulates emission from diesel engine,the particulates of three high-load conditions of the CY4102-CE4 B diesel engine were co...
Method of Determining Design Time Based on Similarity Degree of Products
To solve the problems that product design time was difficult to be forecasted accurately and traditional estimation methods had large error, a design time estimation method was proposed based on similarity degree of prod...