Eco-Friendly Soaking Process Using Tannic Acid as an Alternative Bactericide

Journal Title: Archives of Environmental Protection - Year 2014, Vol 40, Issue 1

Abstract

Eco-friendly leather processes based on the usage of natural products have become a potentially attractive issue for leather industry during the last few decades. Synthetic protective chemicals like bactericides used in most soaking process are known as hazardous substances and cause tannery effluents with high concentrations of Chemical Oxygen Demand (COD). In the present study, the effect of tannic acid on microorganisms, skin, wool and effluent were investigated in order to demonstrate the applicability of tannic acid in soaking process instead of commonly used bactericides. The bacterial load (cfu/ml), COD and Nitrogen Content (N) of the soaking effluents and Total Kjeldahl Nitrogen (TKN) content of skins and wools were investigated. Application of 0.5 and 1 wt% tannic acid concentrations was more effective than commercial bactericide, while comparable results were achieved by 0.1 and 0.3 wt% tannic acid. The application of tannic acid for soaking process resulted in lower COD and N values of effluents. The results show that tannic acid has the potential to be an alternative, eco-friendly bactericide for leather industry by reducing the pollution of leather soaking process.

Authors and Affiliations

Arife Candas ADIGUZEL ZENGIN, Selime Menteş Çolak, Gökhan ZENGIN, Eylem KILIÇ

Keywords

Related Articles

Effectiveness of Intrinsic Biodegradation Enhancement in Oil Hydrocarbons Contaminated Soil

Studies were conducted using a 10-chamber Micro-Oxymax (Columbus, OH, USA) respirometer to determine the effect of bioaugmentation, biostimulation and combination of them on enhancing intrinsic biodegradation of oil hydr...

Effects of Different Agro-Based Materials on Composting of Pulp/Paper-Mill Sludge

The effects of different volumetric ratios of bulking agents to pulp/paper-mill sludge on composting were studied. Rice husk and corncob were used as bulking agents. Volumetric ratios of bulking agents to pulp/paper-mill...

Coal Cleaning Versus the Reduction of Mercury and other Trace Elements’ Emissions from Coal Combustion Processes

Samples of steam coal used in heat and power plants as well as densimetric fractions obtained on a laboratory scale by dense organic liquid separation have been examined. The contents of ash, mercury, chromium, cadmium,...

Utilization of Sludge from Mine Water Treatment Plant in The Segment of Thermal Insulation Mortars

The results from the experimental research are presented in the abstract. The experimental research involved utilization of the sludge from the mine water treatment plant of Coal Quarry ČSA/Czechoslovak Army/ (hereinafte...

Uptake of Toxic Trace Metals (Cd, Pb) and Micro Nutrients (Cu, Zn, Mn) by Sugarcane (Saccharum Officinarum L.) Irrigated with Treated Effluents of Sugar Industry

The accumulation and translocation of trace metals in soil and in sugarcane crop irrigated with treated effluents from sugar industry compared to soil and sugarcane crop irrigated with bore-well water were determined. In...

Download PDF file
  • EP ID EP319719
  • DOI 10.2478/aep-2014-0003
  • Views 77
  • Downloads 0

How To Cite

Arife Candas ADIGUZEL ZENGIN, Selime Menteş Çolak, Gökhan ZENGIN, Eylem KILIÇ (2014). Eco-Friendly Soaking Process Using Tannic Acid as an Alternative Bactericide. Archives of Environmental Protection, 40(1), 3-12. https://europub.co.uk./articles/-A-319719