EFFECT OF AUSTENITISING ON THE STRUCTURE AND PROPERTIES OF LOW-ALLOY Cr-Mo-V STEELS AFTER LONG-TERM OPERATION IN CREEP CONDITIONS FOR THE POWER INDUSTRY

Journal Title: Prace Instytutu Metalurgii Żelaza - Year 2018, Vol 70, Issue 2

Abstract

The article concerns the revitalising heat treatment of components of the pressure part of power units operating under creep conditions. The possibilities of “recovering” the structure and functional properties similar to those of the initial state are shown on the example of elbows and straight sections made of 14MoV6-3 steel (13HMF), after long-term opera-tion, significantly beyond the computational working time, with slightly diversified but significant exhaustion. It is possible by selecting the type and parameters of heat treatment depending on the structure class after operation and the corresponding degree of exhaustion. The effectiveness of revitalising heat treatment is shown, especially in relation to the recovery of impact resistance and creep resistance due to the obtained structure corresponding to the initial state. The defined limitation in the operation of revitalising heat treatment of materials after long-term operation in creep conditions is the structure after operation, in which the initiation of internal damages as a result of creep will be revealed.

Authors and Affiliations

Tadeusz Jóźwik

Keywords

Related Articles

MICROSTRUCTURE AND MECHANICAL PROPERTIES OF A SIMILAR T24 STEEL WELDED JOINT AFTER SERVICE

The material under investigation was a welded joint made of 7CrMoVTiB10-10 (T24) steel after 36,000 hours of use at the temperature of 540°C and pressure of 27 MPa. The test samples for the study were taken from a membra...

OPERATION OF A POWER UNIT AS A PEAK UNIT AND ITS IMPACT ON THE ECONOMY AND RELIABILITY OF THE POWER SYSTEM

Wind power plants are at the forefront of the development of renewable energy sources (RES) but their operation depends on changing weather conditions. Favouring energy obtained from renewable sources forces the operatio...

Гендерна політика у сфері вищої освіти: проблеми нерівності та шляхи їх вирішення.

У статті проведено аналіз гендерної нерівності у системі вищої освіти країни, виявлено наявну горизонтальну та вертикальну сегрегації. Представлено статистичні відмінності щодо гендерного представ...

APPROACH TO FERROMAGNETIC SATURATION FOR AMORPHOUS FE-BASED ALLOY

The paper presents the results of research on the structure and selected properties of magnetic alloys based on Fe. The alloy with the chemical composition Fe36Co36Y8B20 was produced using two methods: forcing and suckin...

Forecasting the development of the national construction market in terms of the economic crisis

The paper considers the main problems in the construction market in Ukraine economic crisis and analyzes the structural problems of the industry, studied the experience of transformation construction industries in oth...

Download PDF file
  • EP ID EP429663
  • DOI 10.32730/imz.0137-9941.18.2.01
  • Views 81
  • Downloads 0

How To Cite

Tadeusz Jóźwik (2018). EFFECT OF AUSTENITISING ON THE STRUCTURE AND PROPERTIES OF LOW-ALLOY Cr-Mo-V STEELS AFTER LONG-TERM OPERATION IN CREEP CONDITIONS FOR THE POWER INDUSTRY. Prace Instytutu Metalurgii Żelaza, 70(2), 2-18. https://europub.co.uk./articles/-A-429663