Effect of Different Cutting Tools in Turning Operation – A Comparative Study to Ensure Green Performance
Journal Title: International Journal of engineering Research and Applications - Year 2018, Vol 8, Issue 1
Abstract
Machining depends on various input parameters such as selection of various cutting tool, variation of speed, depth, feed, selection of cutting fluid etc. Ecological and Environmental aspects are being considered while doing this project. The purpose of this project is focussed on study of speed, surface roughness, cutting forces and power consumption on a centre lathe using single point cutting tool. The tools selected are Carbide and Ceramic. Various cutting fluid are also used such as vegetable oil, palm oil, soya oil etc. The aim of this project is to do a case study varying the various parameters and find the most eco friendly and least power consumed procedure which will benefit the Environment. Further, the selection of cutting tool will be done by the different Multi criteria decision making (MCDM) techniques which enhance the green performance of machine.
Authors and Affiliations
Suvayu Sarkar, Ankur Das
Keywords
Related Articles
- EP ID EP393468
- DOI 10.9790/9622-0801045565.
- Views 90
- Downloads 0
Partial Replacement of Fine Aggregate with Glass Using DIC Technique with Waste Materials for Investigation of Crack Propagation.
This report mainly focuses on measurements of deflection, strain and crack propagation in structures using digital image correlation (DIC) method. This is non-destructive evaluation system. In particular, monitoring the...
Characterization and Mechanical Properties of hybrid SiC+Al2O3 reinforced Al6061-T6 surface composite
Friction stir processing (FSP) was used for the fabrication of Al 6061 with SiC, Al2O3 nano composites for surface applications. The influence of rotational speed on mechanical properties of fabricated Aluminium alloy ba...
Comparing the Reliability of Single Frequency Gps Receivers: A Field Study
As GPS units are becoming smaller and less expensive, the use of GPS is becoming more common in land, air and marine navigation and surveying also the GPS has an an expanding number of applications in Commerce and govern...
Use Of Human Ergonomics In Power Harnessing
This paper emphasizes the use of human ergonomics to harness the energy from energy generators such as piezoelectric films placed in chairs and desks where humans would apply certain amount of pressure while carrying out...
Unsupervised Kannada Stemmer using Partial Lemmatizer and Indo – WordNet
Stemming is basically an operation that converts morphologically related words to a common stem or root word by removing their suffixes or prefixes, but it is not necessary that root or stem is a proper dictionary word....