EFFECT OF DURATION AND TEMPERATURE OF CURING ON COMPRESSIVE STRENGTH OF FLY ASH BASED GEOPOLYMER CONCRETE
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 5, Issue 4
Abstract
The optimum temperature and duration of curing is essential in geopolymerization reaction to achieve higher strength. As such, fly ash based geopolymer concrete were prepared by varying the curing temperature of 600, 900 and 120°C, for the duration of 6,12,16 and 24 hours. The fly ash was activated by sodium silicate and sodium hydroxide solution with ratio between sodium silicate and alkaline activator was 2.5. The result show that with increase in duration and temperature of curing the compressive strength of fly ash based geopolymer concrete increase.
Authors and Affiliations
Keywords
Related Articles
- EP ID EP96014
- DOI 10.5281/zenodo.50422
- Views 99
- Downloads 0
Finite Element Analysis of Mono Composite Leaf Spring: A Review
Leaf springs are one of the oldest suspension components those are still frequently used, especially in commercial vehicles. In recent time it is very necessary to reduce weight while increasing or maintaining str...
Reduction of Shrinkage Defect in Valve Body Casting Using Simulation Software
The ability of fluid to assume the shape of its container is exploited by casting process, which involve melting and pouring liquid metal into a mould and allowing it to solidify, solidify piece known as casting....
THE DISCREPANCY OF THE STUDENTS’ MATHS ACHIEVEMENT BASED ONTHE COMBINATION OF COOPERATIVE LEARNING MODEL, STUDENTS’CHARACTERS BEHAVIOUR, AND EDUCATION LEVEL (EXPERIMENTALSTUDY ON THE STUDENTS OF SENIOR AND JUNIOR HIGH SCHOOLS INKENDARI
This 3x3x2 factorial-designed experimental study aims at analysing the discrepancy of students’ Mathsachievement based on the combination of cooperative learning model (Jigsaw-STAD, TSTS-STAD and STAD),the students...
Analysis of Auto-Gear Shifting Mechanism on different Load Conditions
As conventional gear-boxes are capable to vary the gear arrangement according to fluctuating load. In this paper fabrication of an automated gearbox is done and comparison of torque, rpm is carried out with standa...
A NOVEL APPROACH FOR HYPERSPECTRAL IMAGE SEGMENTATION USING BINARY PARTITION TREE
In this paper, we are doing the segmentation of hyperspectral image using the binary partition tree. Hyper spectral imaging has enabled the characterization of regions based on their spectral properties. Segmentat...