Effect of Graphene and Silica Fillers on Mechanical Properties of Polymer Nano Composites
Journal Title: International Journal of Advances in Scientific Research and Engineering - Year 2017, Vol 3, Issue 10
Abstract
In the recent years Polymer Nano composites have become promising materials in all engineering materials for transportation, automotive, and biomedical applications. This paper presents various combinations of Nano fillers and matrix materials which were used to develop the Nano composite material by means of simple compression molding technique and characterization of mechanical properties. The effect of Nano Silica (0-25% by weight) and these properties was studied. The silica Nano filler has received much attention due to their ordered structure and high surface area. The Graphene has attracted considerable interest over recent years due to its intrinsic mechanical properties. Finally, Nano composites were subjected to tensile, flexural, impact and hardness testing to analyze the mechanical properties.
Authors and Affiliations
Keywords
Related Articles
- EP ID EP330508
- DOI 10.7324/IJASRE.2017.32510
- Views 75
- Downloads 0
Electrical and Mechanical Properties of Irradiated Polycarbonate Using Argon Ion Beam
Cold cathode ion source used for irradiate poly carbonate films with different argon ion fluence,0.5 x 1018 and 1 x 1018 ions.cm-2. Penetration of argon ions are observed and measure using SRIM Program. The values of die...
Experimental Investigation on the Influence of Density of Fluid On Efficiency of V- Notch
In open waterway flows, the data of the water discharge is a key parameter and a range of measurement technique was developed. Numerous procedures rely on some practical coefficients and there is a need to acquire new ex...
Comparative Study of Multi-Storey RC Building Having Flat Slab with and without Shear Wall with Conventional Frame Structure Subjected To Earthquake
In present era, there has been a considerable increase in the number of tall buildings. In construction industry a conventional RC building were commonly adopted for constructing residential, commercial and office buildi...
CHARACTERIZATION OF ALUMINUM ALLOY PARTICULATE REINFORCED METAL MATRIX COMPOSITE
Aluminum metal matrix composites are new engineering materials used in various fields of engineering. This paper highlights the synthesis of Al-Cu-Mg alloy – Titanium Dioxide particulates reinforced metal matrix composit...
Experimental Investigation of RCC Beam for Analyzing Crack Variation by DIC Method
The purpose of this study is to investigate the mode of crack propagation in reinforced concrete using Digital Image Correlation (DIC-MAT LAB). DIC is a robust, non-contact and precise tool for fracture measurements. Dig...