Effect of Heat Treatment on Wear behavior of Hybrid Aluminum Metal Matrix Composites
Journal Title: Tribology in Industry - Year 2019, Vol 41, Issue 3
Abstract
The focus of the paper is the wear behavior of hybrid aluminum metal matrix composites. The main objective of the investigation is to conduct the wear test at room temperature for both the as-cast and age hardening conditions. Materials chosen for the study are Aluminum 7075 as a matrix, Silicon Carbide and Alumina are the reinforcements. Hybrid metal matrix composites are produced by utilizing stir casting route for 5–15 wt.% silicon carbide and alumina. Microstructural characterization of hybrid aluminum metal matrix composites reveals the homogeneous mixing of reinforcements. It is noticed that the higher composite hardness is obtained due to the raise in weight percentage of the reinforcement up to 10% of hybrid reinforcements. In the T6 heat treatment, there is a gain in hardness by 24 % for optimum percentage of reinforcement i.e. 10 % compare with as-cast composites.
Authors and Affiliations
A. M. Rajesh, M. K. Kaleemulla, S. Doddamani
Keywords
Related Articles
- EP ID EP643132
- DOI 10.24874/ti.2019.41.03.04
- Views 77
- Downloads 0
Perspective Method of Restoration of Autotractor Parts by Electrocontact Welding of Powder Materials in the Magnetic Field
The cause of the failures of autotractor machines is mainly the process of inevitable wear of the mating parts. Moreover, it was proved that more than 80 % of parts of assemblies and assemblies of many tractors and cars...
Bearing Health Monitoring
Health monitoring of bearings is a widely researched topic and has been attempted by analysing acoustic, thermal and vibration signatures. The methods usually require signal of a healthy bearing to be used as a baseline....
Roughness and Texture Concepts in Tribology
Current knowledge on scale and spatial organization of engineering surfaces is presented. Main methods of surface roughness analysis are discussed. A review of theoretical and practical problems in tribology involving co...
Energy Balance of Friction and Friction Coefficient in Energetical Interpretation
Sliding friction energy model is proposed. In this model, generalized mechanism of transformation and dissipation of energy under friction the model of elastic-plastic deformation and fracture contact volumes is consider...
Effect of Lubricating Oil on Tribological behaviour in Pin on Disc Test Rig
A test method has been developed to evaluate the friction and wear behaviour of cylinder liner and piston ring materials for four stroke engine system. Realistic engine oils are used to describe the behaviour of this tes...