Effect of Lamination Angle and Thickness on Analysis of Composite Plate Under Thermo Mechanical Loading
Journal Title: Strojnicky casopis - Journal of Mechanical Engineering - Year 2017, Vol 67, Issue 1
Abstract
Analytical formulation and solution of stress analysis of composite plate subjected to thermo mechanical loading for various ply orientation and thickness of lamina are studied. The main aim of the paper is to investigate how mechanical and thermo mechanical loading would affect the stress ratio and stress distribution of composite plate. The plate is composed of layers of glass-epoxy composite and the orientation of the layers is assumed to be antisymmetric about the neutral axis of the laminate. The plate is subjected to a combined mechanical loading of tensile force and moment along x direction. The thermo mechanical stress is calculated for different ply orientation and thickness ratio, subjected to a temperature change and mechanical loading. The effect of number of lamina and varying thickness of laminate on the stress ratio and stress distribution is studied. The results in this paper are obtained by use of MATLAB Programming and by Finite element software ANSYS 14. Results obtained from both the methods are compared. Such type of loading finds wide application in aircraft flying at high altitude, marine application, medical devices etc.
Authors and Affiliations
Arnab Choudhury, Samar Chandra Mondal and Susenjit Sarkar
Keywords
Related Articles
- EP ID EP43899
- DOI -
- Views 193
- Downloads 0
Analysis of Bolt Bending in Preloaded Bolted Joints
Classical analysis methods are applied to show how flexural deflections due to shear strain in the flange pack produce bending moments and tensile loads on bolts within preloaded bolted joints. It was found that in joi...
ELASTOSTATIC ANALYSIS OF THE SPATIAL FGM STRUCTURES
In this contribution, results of elastostatic analysis of spatial composite beam structmes are presented using ow- new beam finite element of double symmetric cross-section made of a Ftmctionally Graded Material (FGM)....
Process Parameters Optimization for Producing AA6061/TiB2 Composites by Friction Stir Processing
Friction stir processing (FSP) is solid state novel technique developed to refine microstructure and to improve the mechanical properties and be used to fabricate the aluminium alloy matrix composites. An attempt is ma...
Natural Fibers and Biopolymers Characterization: A Future Potential Composite Material
Now days, green composite materials are now gaining popularity for the various industrial applications. It is a combination of naturally occurring reinforcement like jute, sisal, flax, hemp, and kenaf; and matrix mater...
Investigation of Frictional Stick-Slick Effect in Disk Brake NVH
Paper describes the mechanism of vibration of a minimal automotive disc brake model which can lead to unwanted effects known as brake Noise Vibrations and Harshness (NVH). Stick-slip frictional effects are mathematical...