Effect of Minimum Quantity Lubrication on Surface Roughness and Temperature in Milling of EN31 Steel for Die Making
Journal Title: Strojnicky casopis - Journal of Mechanical Engineering - Year 2019, Vol 69, Issue 1
Abstract
Minimum Quantity Lubrication has enormous influence on the process parameters in machining. The main aim of the present work is to study the effects of spindle speed, depth of cut, tool material, amount of coolant dispensed and type of coolant on surface roughness and tool temperature in EN31 steel die making including Minimum Quantity Lubrication (MQL) by introducing a self-designed MQL setup and to optimize the responses using fuzzy-logic and Particle Swarm Optimization technique.
Authors and Affiliations
Bhosetty Keerthana, Gurram Vijaya Kumar and Kumba Anand Babu
Keywords
Related Articles
- EP ID EP43976
- DOI https://doi.org/10.2478/scjme-2019-0005
- Views 211
- Downloads 0
Tracking Filter Design for Predictive Maintenance of Jet Engine – Different Approaches and their Comparison
The aim of this paper is to design, implement, test and compare several tracking filtration methods for predictive maintenance of a jet engine. Based on literature review multiple possible methods are described. Approp...
Influence of Bypass on Thermo-Hydraulics of VVER 440 Fuel Assembly
The paper deals with CFD modelling and simulation of coolant flow within the nuclear reactor VVER 440 fuel assembly. The influence of coolant flow in bypass on the temperature distribution at the outlet of the fuel ass...
Effect of Additives on Static Settled Concentration, pH and Viscosity of Bottom Ash-Water Suspension
In the present work, static settled concentration, pH and viscosity of bottom ash is studied with addition of additive. Sodium sulfate is used as an additive with proportion of 0.2, 0.4 and 0.6% (by weight). The solid...
Analysis of Mechanical Properties of the “Bearing” Part Based on Polished Samples
Presented work describes the use of algorithm for the computation of thermo-elastic properties of randomly reinforced composite which is based on histogram from image analysis done on ITAM, CAS. Three polished samples...
The Effects of Piezoelectricity Matrix Constants on the Charge of a Thin Membrane
This article is devoted to the comparison of the influence of the piezoelectric matrix properties on the magnitude of the resulting charge when a thin piezoelectric membrane of circular cross section, made from alumini...