Effect of multi-walled carbon nanotube on mechanical and rheological properties of silane modified EPDM rubber

Journal Title: Polyolefins Journal - Year 2016, Vol 3, Issue 2

Abstract

A novel mixing approach for achieving a good dispersion of multi-walled carbon nanotubes (MWCNTs) in ethylene- propylene diene monomer (EPDM) matrix has been investigated. In this approach EPDM was modified with vinyltrimethoxysilane (VTMS) during melt mixing. In addition the effect of MWCNT concentration on mechanical and rheological properties of modified EPDM has been studied. The formulated composites by this method exhibited significantly enhanced physical properties even at very low nanotube concentration. The grafting reaction was confirmed by Fourier transform infrared spectroscopy (FT-IR) peak at 1070 and 1250 cm-1according to Si-O and Si-C vibration. The state of dispersion of the fillers in the polymer matrix was evaluated through transmission electron microscopy (TEM) and scanning electron microscopy (SEM), In addition surface topology was studied with atomic force microscopy (AFM). The results showed that VTMS-grafted on the EPDM surface improved the dispersion of MWCNTs in the matrix. The rheological characteristics have been studied by rubber process analyzer (RPA). Some properties such as storage modulus (Ǵ) and complex viscosity (η^*) increased with increasing MWCNT content. It was found that at concentration of 2 wt.% MWCNT, the nanocomposites exhibited notably enhanced mechanical properties such as modulus and tensile strength.

Authors and Affiliations

Fateme Khademeh Molavi, Sedigheh Soltani, Ghasem Naderi, Rohollah Bagheri

Keywords

Related Articles

Probing into morphology evolution of magnesium ethoxide particles as precursor of Ziegler-Natta catalysts

Mg(OEt)2 with spherical morphology is one of the most important precursors for the preparation of industrial Ziegler-Natta catalysts. In the present article, morphology evolution of Mg(OEt)2 particles is studied in the c...

Theoretical screening of zeolites for membrane separation of propylene/propane mixtures

In this paper, the performances of potential zeolite membranes were estimated by the Maxwell-Stefan model and then they were placed in Robeson plot of propylene/propane separation. Additionally, the effects of feed press...

Imido-modified SiO2-supported Ti/Mg Ziegler-Natta catalysts for ethylene polymerization and ethylene/1-hexene copolymerization

A novel imido-modified SiO2-supported Ti/Mg Ziegler-Natta catalyst for ethylene and ethylene/1-hexene polymerization is investigated. The catalyst is prepared by modification of (SiO2/MgO/MgCl2)TiClx Ziegler-Natta cataly...

Embedding neat and carboxylated nanodiamonds into polypropylene membranes to enhance antifouling properties

The aim of the present work is to enhance the antifouling properties of polypropylene (PP) membrane based on hydrophilicity improvement. Different contents of neat and modifed nanodiamond (0.25, 0.50, 0.75 and 1.00 wt.%)...

Production of titanium tetrachloride (TiCl4) from titanium ores: A review

Titanium (Ti) is the ninth most abundant element on earth. The titanium mineral ores are widely distributed in different parts of the world. The two main ores of titanium include rutile (TiO2) and ilmenite (FeO.TiO2). It...

Download PDF file
  • EP ID EP283159
  • DOI 10.22063/POJ.2016.1293
  • Views 121
  • Downloads 0

How To Cite

Fateme Khademeh Molavi, Sedigheh Soltani, Ghasem Naderi, Rohollah Bagheri (2016). Effect of multi-walled carbon nanotube on mechanical and rheological properties of silane modified EPDM rubber. Polyolefins Journal, 3(2), 69-77. https://europub.co.uk./articles/-A-283159