Effect of rapid Solidification on mechanical properties of free machining lead free aluminum alloys for improved machinability
Journal Title: JOURNAL OF ADVANCES IN PHYSICS - Year 2017, Vol 13, Issue 10
Abstract
There have been very few reports describing the free machining lead free aluminum alloys containing minimal amounts of tin and indium melt spun process. Our paper describes the effect of fundamental factors on the machinability of free machining lead free aluminum alloys rapidly solidified from melt. Structural and thermal properties have been investigated by x-ray diffraction (XRD) and differential scanning calorimetry (DSC) techniques. Tensile test machine used in studies the mechanical properties such as ultimate tensile strength, elastic constants, yield strength and critical shear stress for Al-Zn-Sn-In alloys. It is noticed that mechanical and thermal properties attributed to fine grained structure, reduced levels of segregation and presence of new intermetallic compounds (IMC) such as AlZn and SnZn due to high casting rate by rapid solidification processes. The determination of mechanical properties was suggested to be attributed to the gradual increase of α-Al crystals. We evaluated the tensile properties using tensile test machine of the melt-spun ribbons at varied stress-strain rates to determine the underlying deformation mechanisms .Critical shear stress (CSS) was also calculated .It was found that it is equal to 9.29 GPa for annealed ribbons at 262 0C for 9 hrs. The results showed that several combination of tensile strength ,yield strength ,elastic moduli can be generated from Al- 0.1wt% Zn-1.5 wt% Sn- 1.63 wt% In alloys before and after heat treatment at (262 0C for 3,6,9 hrs) to meet the needs of free machining aluminum alloy applications.
Authors and Affiliations
Nermin Ali Abdelhakim, Rizk Mostafa Shalaby, Mustafa Kamal
Keywords
Related Articles
- EP ID EP653433
- DOI 10.24297/jap.v13i10.6436
- Views 56
- Downloads 0
Law of gravity
This essay introduces a realistic look at our laws of gravity, and the effects thereof, and it goes beyond to reveal how and by what gravity comes about in the fundamentals of nature upon which the earth and all spheres...
THE PHYSICAL MODEL FOR AN ORGANIZATION: SIMILAR ASPECTS BETWEEN "ATOM'' AND "ORGANIZATION''
In this paper we claim that there exist some similar aspects between "atom'', as a typical physical system, and its counterpart "organization'' as a social system. These similar aspects have been shown by comparison betw...
Yang-Mills Families
The Yang-Mills theory structure is based on group theory. It rules the symmetry relationship where the number of potential fields transforming under a same group must be equal to the number of group generators. It define...
Axiomatic Local Metric Derivatives for Low-Level Fractionality with Mittag-Leffler Eigenfunctions
In this contribution, we build up an axiomatic local metric derivative that exhibits Mittag-Leffler function as an eigenfunction and is valid for low-level fractionality, whenever the order parameter is close to 1. This...
ETUDE DE L’ISOTHERME 25 °C DU SYSTEME QUASI QUATERNAIRE H2O - Zn(NO3)2,6H2O – Cu(NO3)2,3H2O - NH4NO3 II- ISOPLETHES : 41 MASSE % Cu(NO3)2, [MASSE DE NH4NO3] = -10/9 [MASSE DE Zn(NO3)2] + 100, [MASSE DE H2O] = 0.5702 [MASSE DE ZN(NO3)2] + 0.2879[ MASSE DE
The solid-liquid equilibria of the quasi quaternary system H2O Zn(NO3)2,6H2O Cu(NO3)2,3H2O-NH4NO3 were studied at 25°C by using a synthetic method based on conductivity measurements. Three isoplethic sections has been es...