Effect of repair methods on mechanical behaviors of repair area in composite laminate fuselage skin with different damage size
Journal Title: Materials Science: Advanced Composite Materials - Year 2018, Vol 2, Issue 3
Abstract
Composite laminates are widely used in the large civil aircrafts because of their excellent mechanical properties. The maintenance and repair of composite laminates become essential. In this paper, a new adhesive-rivet hybrid repair of composite laminate fuselage skin is presented. For the circular hole damage with the diameter of 90mm and 50mm, the finite element simulation models of adhesive repair and adhesive-rivet hybrid repair were built respectively. Uniform pressure load was applied on these finite element models. The mechanical properties of laminate motherboard, patch and adhesive film for these four models were analyzed. The effects of adhesive repair, adhesive-rivet hybrid repair on mechanical behaviors of repair areas of composite laminate fuselage skins with different damage size were studied. By analyzing the mechanical behaviors of these two repair methods, a suitable repair method can be obtained.
Authors and Affiliations
Liping Liu, Yucan Wang, Jing Tian, Ruifeng Wang, Jianxin Xu
Keywords
Related Articles
- EP ID EP679018
- DOI -
- Views 224
- Downloads 0
Mechanical and structural properties of termite soil as a partial replacement to cement for different applications
This paper presents the results of the experimental and theoretical study of the mechanical and structural properties of termite soil as a partial replacement to cement for different applications, especially in the build...
Rocess Design of Fiber Reinforced Magnesium Matrix Composites
This paper chooses magnesium as the matrix of composite materials, selects carbon fi ber as reinforcement, and designs the composite scheme according to the structure and performance of Mg-based composites. The performan...
Advanced composite materials manufacturing technology
In recent years, a variety of composite materials preparation technology has been updated, from ceramic matrix composites, metal matrix composites to polymer matrix composites, a variety of preparation techniques have be...
Short beam strength and flexural behavior of GFRP laminates embedded with short carbon fibers having notch
This paper examines the mechanical performance of eight-layered GFRP laminate embedded with short carbon fibers (SCF). Eight layered GFRP samples are prepared using press molding machine at 40 KN pressure. Notched sample...
The structure and properties of laser seam stepper system (LSS) welded the low alloy high strength steel DOCOL 1200M with martensitic structure
This paper will present the influence of joining process parameters on the structure and properties of overlapped welded joints of 1.8 mm DOCOL 1200M steel. The obtained welded joints were subjected to micro- and macrosc...