Effect of the edge geometry in a cutting chain on the chain saw vibration level
Journal Title: Acta Scientiarum Polonorum Silvarum Colendarum Ratio et Industria Lignaria - Year 2010, Vol 9, Issue 1
Abstract
Vibration levels were measured while cross-cutting pine wood logs. In the experiment five chisel type cutting chains, with a 0.325” pitch were used. The chains differed in the top-plate filing angle which had the following values: 20º, 25º, 30º, 35º and 40º. The cross-cutting was performed by a chain saw operator. The measurements were carried out on the front and rear handles in the x, y and z axes. There were 18 measurements for each top-plate filing angle on each of the handles. The Robotron M1300 meter was used. Considerably higher vibration levels were observed on the rear handle. The effect of the top-plate filing angle on the mechanical vibrations was statistically significant. The correlation between the angle and the vibration value showed a weak relation, but it was statistically significant in those cases in which it appeared.
Authors and Affiliations
Włodzimierz Stempski, Jarosław Wegner, Krzysztof Jabłoński
Pozyskanie zewnętrznych środków finansowych przez Regionalną Dyrekcję Lasów Państwowych w Krośnie oraz kierunki ich przeznaczenia w latach 2007–2013
Lasy Państwowe, realizując cele ustawowe, ponoszą koszty zagospodarowania i ochrony lasu oraz nakłady na przedsięwzięcia, które są wdrażane również dzięki środkom finansowym pozyskanym ze źródeł zewnętrznych. Celem badań...
Wstępne wyniki badań nad czynnikami redukującymi szkodniki pierwotne sosny w okresie zimowym.
Celem badań było określenie śmiertelności stadiów zimujących Panolis flammea, Hyloicus pinastri, Bupalus piniaria, Acantholyda posticalis i Diprion spp. Doświadczenia przeprowadzono od grudnia 2017 do lutego 2018 roku na...
Analiza struktury i tempa zmian kosztów edukacji przyrodniczo-leśnej w Nadleśnictwie Włoszakowice.
Celem pracy była analiza kosztów poniesionych przez Nadleśnictwo Włoszakowice na prowadzenie edukacji przyrodniczo-leśnej w latach 2005–2014. W pracy zastosowano podział kosztów na VII grup: artykuły edukacyjne, usługi e...
Variant designing of educational forest nature pathways by using GIS
The objective of this paper was to test in practical conditions possibilities of the application of GIS to design multi-variant educational pathways in the forest. An attempt was also made to develop a system of manageme...
The effect of sunshine on the height increment of Scots pine
One of the main dendrometric characteristics of Scots pine is the height increment. This characteristic is used to assess the condition of trees and determine radial increments in considered periods. Meteorological condi...