Effects Exerted by Slag Carried over From Converter in the Ladle on the Aluminum Assimilation
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2014, Vol 37, Issue 1
Abstract
In the present paper are shown aspects of the influence exerted by the some less controlled parameters of BOF steelmaking, mainly of slag characteristics at tapping. Following the necessities to control the steel deoxidization by aluminum assimilation evaluated by soluble aluminum and its behavior, the presented data are evaluated based upon direct measurements of dissolved oxygen in steel before tapping, steel temperature before tapping, argon bubbling in tapping ladle under slag at various contents of (FeO), including its final content. The presented data are obtained in full scale plant conditions on standard weight of heats and applying an established steel making technology. It is concluded that steel temperature in final stage of steel making and (FeO) content of slag carried over from BOF to the ladle exert a strong influence on the aluminum assimilation in steel and further on the other quality characteristics of steel. A strong variability of the parameters taken into account is present and this is due to the insufficient control of the amount of slag carried over to the ladle at tapping.
Authors and Affiliations
Petre Stelian NIȚĂ
Keywords
Related Articles
- EP ID EP590612
- DOI -
- Views 93
- Downloads 0
A Study of Electric Properties of Fiber Fabric Based Filled Epoxy Composites
Electric and magnetic properties of laminate carbon fiber fabric based epoxy composites are investigated through experimental techniques. Various concentrations of powder fillers were used in order to change the basic pr...
Dental Metals and Alloys Characterization
Metals and alloys in dentistry have seen remarkable progress due to their biocompatibility and deepen research on the application of advanced technologies to improve surface properties by controlling interactions materia...
Glow Discharge Optical Emission Spectrometry (GDOES), an Effectiveness Method for Characterizing Composition of Surfaces and Coatings
Within the frame of this work, the technical procedures and real advantages of using Glow Discharge Optical Emission Spectroscopy (GDOES) for establishing depth concentration profiles of surfaces are presented. GDOES can...
The Protective Behaviour of Titanium Nitride Coatings
The experiments conducted to obtain a thin layer of nitride through the vapour chemical deposition method have followed an original path to obtain TiN directly in the working room thus avoiding the import of these hazard...
The Chemical and Metallurgical Analysis of Cooper-Based Shape Memory Alloys
The paper presents some aspects on the thermo-mechanical fatigue of shape memory alloy, a documentary synthesis of their industrial applications and chemical aspects concerning the use of these alloys in biomedical appli...