Effects of Electrical Potential and Temperature on Rehydration Behaviour of Pasta Samples during Ohmic Heating and Soaking

Abstract

In the present study, rehydration of pasta samples was examined during soaking at different temperatures (75, 85 and 95°C) and during ohmic heating at different electrical potential levels (10, 20, 30 and 40 V/cm) as an alternative method of pasta cooking. Two effective diffusion coefficients were defined using Fick’s second law of diffusion for regular soaking experiments and three diffusion coefficients were calculated to describe the rehydration behaviour during ohmic heating. The effect of applied voltage and temperature on the diffusion coefficients were evaluated using an Arrhenius type equation. Moreover, the two common models that are used to describe rehydration behaviour of food materials, namely Peleg and Weibull models, were used for kinetic analysis of rehydration experiments. It was observed that an increment both in temperature of cooking water and applied voltage for ohmic heating enhanced the water absorption rate of pasta samples then the rehydration was completed faster. The Peleg and Weibull models showed promising performance for regular soaking experiments where the first one could not describe moisture change of pasta during ohmic heating at a desired level. Different from soaking testes, a delayed moisture uptake phase was observed at the very beginning of ohmic heating experiments however it can be concluded that ohmic heating led an increment in moisture uptake rate in general.

Authors and Affiliations

Yelizcan Turgut, Sebahattin Serhat Turgut, Erdoğan Küçüköner, Erkan Karacabey

Keywords

Related Articles

Specific Features Of Iron Ore Of Lisakovski Deposit

The article presents the results of laboratory studies of the enrichment of oolitic ores of the Lisakovski deposit by the method of magnetic separation.The results of morphometric analysis and the study of the quality of...

A Historical Building Functioned As A Museum; Bursa Umurbey Bath

production centers of Bursa in the past, was built in 1430. It is important because the bath reflects its architectural characteristics. The Turkish Baths are divided into two groups: "Single Baths" where men and women b...

Effects of Electrical Potential and Temperature on Rehydration Behaviour of Pasta Samples during Ohmic Heating and Soaking

In the present study, rehydration of pasta samples was examined during soaking at different temperatures (75, 85 and 95°C) and during ohmic heating at different electrical potential levels (10, 20, 30 and 40 V/cm) as an...

Changes in Mechanical and Morphological Properties of AISI 420 Stainless Steels Welded with M42 Steel Wire Associated with Weld Cooling Medium

In this study, the method AISI 420 TIG welding of martensitic stainless steels in the protected environment of Ar gas and 75 amps and with a weld speed of 4.5cm/min was carried out using M42 steel wire. For this purpose,...

Solid And Biological Wastes Production Of Electricity

In recent years, the population of our country has increased significantly. Following this rise, both the shelter and the energy needs of the factories have seen a big rise. In our country where energy requirements are m...

Download PDF file
  • EP ID EP605059
  • DOI -
  • Views 37
  • Downloads 0

How To Cite

Yelizcan Turgut, Sebahattin Serhat Turgut, Erdoğan Küçüköner, Erkan Karacabey (2019). Effects of Electrical Potential and Temperature on Rehydration Behaviour of Pasta Samples during Ohmic Heating and Soaking. Afyon Kocatepe Üniversitesi Uluslararası Mühendislik Teknolojileri ve Uygulamalı Bilimler Dergisi, 2(2), 74-84. https://europub.co.uk./articles/-A-605059