Effects of Uncrushed Aggregate on the Mechanical Properties of No-Fines Concrete

Journal Title: Engineering, Technology & Applied Science Research - Year 2018, Vol 8, Issue 3

Abstract

Concrete’s self-weight is a major aspect of a structure’s overall weight. Recently, the use of lightweight concrete (no-fines, foamed and cellular concrete) has been increased. Normally no-fines concrete is produced with crushed coarse aggregate of uniform gradation. This study aims to investigate experimentally the effects of the use of uncrushed coarse aggregates on unit weight, compressive and tensile strength of the no-fines (NFC) as well as conventional concrete (CC). In addition, the effects of coarse aggregate size on the mechanical properties were also studied. Four gradations of uncrushed coarse aggregates ranging between (5.5-4.75) mm, (10-4.75) mm, (20-4.75) mm and (25-4.75) mm were used for preparing the concretes. The fixed cement-aggregate ratios of 1:6 (with w/c ratio=0.4) and 1:2:4 (with w/c ratio=0.5) were adopted for NFC and CC respectively. It was found that the gradation of uncrushed coarse aggregate has a significant effect on the mechanical properties of NFC. A maximum of 16% reduction in self-weight of the concrete without fines was obtained, as compared to that with fines. Moreover, the compressive strength of no-fines concrete significantly improved by replacing crushed with uncrushed coarse aggregate. The compressive strength increased by 16% for the batch of (25-4.75) mm.

Authors and Affiliations

M. A. Memon, M. A. Bhutto, N. A. Lakho, I. A. Halepoto, A. N. Memon

Keywords

Related Articles

Operational Impact of RES Penetration on a Remote Diesel-Powered System in West Papua, Indonesia

When a new power source connects to the distribution or transmission grid, an assessment of its impact is necessary. Technical studies must assess the possible effects of a proposed expansion, reinforcement or modificati...

A Novel Efficient Sine Wave Inverter with Custom Programmed PWM and Intelligent Control

This article presents an efficient design of a pure sine wave inverter which results in an electronic design with reduced losses. The proposed design incorporates the generation of custom programmed pulse width modulatio...

Car Black Box with Speed Control in Desired Areas for Collision Avoidance

This paper presents an advanced step to the concept of car black-box in developing a comprehensive vehicle safety system which would not only record the video and audio, but also try to prevent a possible collision by li...

Clustering of Customers Based on Shopping Behavior and Employing Genetic Algorithms

Clustering of customers is a vital case in marketing and customer relationship management. In traditional marketing, a market seller is categorized based on general characteristics like clients’ statistical information a...

Modeling for Development of Simulation Tool: Impact of TCSC on Apparent Impedance Seen by Distance Relay

The impact of thyristor controlled series capacitor (TCSC) on distance protection relays in transmission lines is analyzed in this paper. Voltage and current data are measured and collected at the relay locations to calc...

Download PDF file
  • EP ID EP168789
  • DOI -
  • Views 230
  • Downloads 0

How To Cite

M. A. Memon, M. A. Bhutto, N. A. Lakho, I. A. Halepoto, A. N. Memon (2018). Effects of Uncrushed Aggregate on the Mechanical Properties of No-Fines Concrete. Engineering, Technology & Applied Science Research, 8(3), -. https://europub.co.uk./articles/-A-168789