EFFICIENCY OF LINEAR PULSE ELECTROMECHANICAL CONVERTERS DESIGNED TO CREATE IMPACT LOADS AND HIGH SPEEDS
Journal Title: Електротехніка і Електромеханіка - Year 2015, Vol 0, Issue 3
Abstract
Considered linear impulse electromechanical converters (LIEC) are used to create a significant impact and high-acceleration actuators on a short active site. The most effective types of LIEC are induction-dynamic (IDC), electro-dynamic (EDC) and electro-magnetic (EMC) converters. In all these types of short-term excitement LIEC carried briefly of the inductor from a pulsed source. This occurs when the magnetic field of the inductor causes the electro-dynamic or electromagnetic forces, leading to a linear movement of the armature. However, the issue at evaluating the effects of IDC, EDC and EMC, for creating a shock simultaneously with high speed to the specified criteria in the presence of ferromagnetic core virtually unexplored. The paper presents the simulated computer-WIDE 2D model of LIEC of coaxial configuration with ferromagnetic core by using software package COMSOL Multiphysics 4.4, taking into account the related electro-magnetic, thermal, and magnetic fields. In addition a synthesis of high-performance IDC, EDC and EMC to ensure maximum impact and speed of the operating element, whereby the comparative analysis of the effectiveness of the IDC, EDC and EMC via an integral index, taking into account the maximum value and momentum of electro-dynamic or electromagnetic force acting on the armature, maximum and average speed armature, efficiency, mass and dimensions performance transducer stray field, the maximum current density in the inductor is carried out. On the basis of the eight selection policies set the most efficient types of power and speed LIEC. It is shown that any one of the strategies IDC selection is not the best. To ensure maximum impact force is the most effective EMC and to ensure the greatest speed – EDC.
Authors and Affiliations
V. F. Bolyukh, S. V. Oleksenko, I. S. Schukin
Keywords
Related Articles
- EP ID EP299853
- DOI 10.20998/2074-272X.2015.3.05
- Views 67
- Downloads 0
FEATURES OF SELECTION OF CAPACITOR BANKS IN ELECTRIC NETWORKS WITH INTERHARMONIC SOURCES
Purpose. Development of a methodology for selecting capacitor bank parameters designed to compensate for reactive power, if there are sources of interharmonics in the electrical network. Development of a methodology for...
SINGLE-CIRCUIT ACTIVE SCREENING OF MAGNETIC FIELD GENERATED BY SEVERAL OVERHEAD TRANSMISSION LINES IN RESIDENTIAL AREA
Purpose. The synthesis of active screening system of magnetic field, generated by several high voltage overhead transmission lines, with the help of single compensation cables is presented. Methodology. The initial param...
DECREASE IN THE DAMAGE OF POWERFUL TURBOGENERATOR STATOR CAUSED BY VIBRATION IN THE END ZONES (ANALYSIS, HYPOTHESES, EXPERIMENT)
The analysis of the turbogenerators’ TВВ-1000-2Y3 failure has shown that the most vulnerable link in the stator is such of their elements as tightening prisms, the teeth of the end packet core, lead-out and connecting bu...
RESEARCH ON ELECTRIC POTENTIALS ALIGNMENT ON THE GROUND SURFACE WITHIN THE GROUNDING CONDUCTOR TERRITORY
Results of research on distribution of electric potentials on the earth surface in the territory with a grounding conductor are analyzed. It is shown that potential over the center of a square grounding conductor can be...
IMPROVING CALCULATION ACCURACY OF CURRENTS IN CABLE SHIELDS AT DOUBLE-SIDED GROUNDING OF THREE-PHASE CABLE LINE
This paper deals with the calculation of currents in shields of single-core cables at double-sided grounding of three-phase cable lines. We consider flat and trefoil cable lines and receive the analytical expressions for...