Eigenmodes analysis of sectoral coaxial ridged waveguides by transverse field-matching technique. Part 2. Results
Journal Title: Вісник НТУУ КПІ. Серія Радіотехніка, Радіоапаратобудування - Year 2013, Vol 0, Issue 55
Abstract
Introduction. The goals of the research presented in the paper are defined. The geometrical configurations of sectoral coaxial ridged waveguides are shown. Cutoff wave numbers. The results of calculations of cutoff wave numbers multiplied by the outer radius of sectoral coaxial ridged waveguide with a ridge on an inner or outer wall obtained by transverse field-matching technique and integral equation technique are shown for the first four modes. The deviation between the results for cutoff wave numbers obtained by these two techniques is less than 0.5 %. Solutions convergence for electric field components distributions. The convergence analysis of electric field components distributions depending on the amount of partial modes is carried out. It is shown, that for correct calculation of sectoral coaxial ridged waveguides field distributions by transverse field-matching technique one should utilize more than 30 partial modes. Electric field components distributions. The electric field distributions in sectoral coaxial ridged waveguides of both configurations are investigated for the first four modes. All electric field components distributions computed by transverse field-matching technique are in good agreement with the ones obtained by integral equation technique with correct account of the singular field behavior at the ridge. This confirms the correctness of the results obtained. Conclusions. General conclusions of the paper are given.
Authors and Affiliations
F. Dubrovka, S. Piltyay
Keywords
Related Articles
- EP ID EP309034
- DOI 10.20535/RADAP.2013.55.13-23
- Views 67
- Downloads 0
Calculating technique of the codegram length for asymptotically reliable radio lines of control
Introduction. Actuality of the task of a choice of codegram length for high-reliable radio lines of control is justified. A purpose and tasks of article are defined. Receiving of estimated ratios. Check of calculation ac...
Experimental assessment of validity of eddy current inspection
Experiment has been executed for the purpose of optimization of diagnostic equipment kit. Numerical values of validity of threshold inspection (of coating thickness, roughness, structure, composition and thickness of met...
Superhigh-frequency device for liquid environment disinfection
Devices, providing high concentration of superhigh-frequency electromagnetic field by means of the transition from a square form of a waveguide to cruciform one and the use of two polarization untied magnetrons, are i...
The macroscopic analysis of radio – control problem
Introduction. Contemporary stage technique’s development is to characterize of radio – control systems broad application. Analysis radio – control systems is based usually on microscopic principle. Actual task is macrosc...
Quarter-wave helicon resonator
Introduction. Helicon waves propagates in the magnetized semiconductor plasma. Helicon waves with circular polarization has a nonreciprocal propagation effect and may have a half-wave resonance between faces of parallel...