Electrical Discharge Machining Characteristics of Hybrid Mg/Sicp/Flyash Composites
Journal Title: International journal of Emerging Trends in Science and Technology - Year 2016, Vol 3, Issue 9
Abstract
The objectives of this research is to prepare the hybrid Mg/SiCp/Flyash metal matrix composite through powder metallurgy technique and investigate the effects of process parameters like current, pulse on time and pulse off time in Electro Discharge Machining characteristics on material removal rate and tool wear rate. The composition is selected on weight percentage basis SiC with 6 % and 6% fly ash with constant 88% Mg as matrix material. With proper uniform distribution particulate dispenses wisely which is evident from SEM analysis. The electrical discharge machining was done though the ELEKTRA PLUS spark erosion machine. Brass tool with 10 mm diameter is used to machine the specimens. Current (I), pulse on time (Ton) and pulse off time (Toff) parameters were varied in this electrical discharge machining process. Experiments were conducted under different conditions of pulse on time (Ton), pulse off time (Toff), current (I). The output responses measured were material removal rate (MRR) and Tool wear rate (TWR). Mathematical models are proposed for the above responses using response surface methodology (RSM). The analysis of variance (ANOVA) was carried out to study the effect of process parameters on process performance
Authors and Affiliations
L. Arun kumar
Keywords
Related Articles
- EP ID EP244957
- DOI -
- Views 111
- Downloads 0
An Influential Algorithm for Outlier Detection
The Subject of Data Mining, which is very vast in the direction of data analyzing , data preprocessing, data extracting, knowledge data discovery, extracting hidden data and many more. Here we discuss one of the parts of...
Designing and Frequency Analysis on Bus Structure for Lynx and Stag
The structural strength is a fundamental concern. Unnecessary weight of the bus structure leads to reduction in overall performance of bus. The designing the whole frame with analysis by using solidwork software and redu...
Control of Power Flow in Transmission Line Using UPFC
Electrical power systems is a large interrelated network which requires a careful design to maintain the system with constant power flow operation without any limitations. Flexible to improve the system stability of a po...
ater Quality Analysis of Muttar River
he Muttar River is an extremely polluted fresh water source with degrading water quality and flow. The river has a twelve kilometer length and an average width of fifty meters.According to t...
An Investigation of Affecting Factors on the Behavior of Selected Fans of Major Soccer League
The aim of this study was to investigate the factors influencing the behavior of the selected fans of the Major League Soccer. The present is practical, descriptive-correlative, and survey in terms objective, strategy, a...