Electromigration Microstructure and Properties of Sn2.5Ag0.7Cu0.1RE/Cu Solder Joints

Journal Title: 河南科技大学学报(自然科学版) - Year 2018, Vol 39, Issue 2

Abstract

The effect of temperature on electromigration microstructure and properties of Sn2. 5 Ag0. 7 Cu 0. 1 RE/Cu solder joints was investigated. With the ambient temperature rising from 100 ℃ to 140 ℃, and the power on time extending from 24 h to 72 h, the cathodic intermetallic compound ( IMC) Cu6Sn5 became thinner, and the morphology was transformed from serrated to scallop. Meanwhile, the anodic IMC was gradually thickened, and the morphology was transformed from scallop to a raised hillock. Thin Cu3Sn layer was formed on the joint of parent metal. The increased thickness of the IMC on the anode side was larger than the decreased thickness of the IMC on the cathode side. The shear strength of Sn2. 5 Ag0. 7 Cu0. 1 RE/Cu solder joints was continually decreased. With the increase of temperature, the fracture mechanism of the shear fracture transforms from mixed fracture occurred in the brazing zone to brittle fracture occurred in the cathodic IMC layer.

Authors and Affiliations

Mengmeng SUN, Keke ZHANG, Chao ZHANG, Ning MA, Huigai WANG

Keywords

Related Articles

Ultrasonic Phased Array Testing and Probability of Detection Quantitative Analysis of Polyethylene Pipe Butt Fusion Joints

The customized polyethylene test block was designed with transverse hole defects at depths of 10 mm, 15 mm, 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, whose diameters were 1 mm and 2 mm respectively. Then probability of detectio...

Chromosome Karyotype Analysis of Transgenic Chickens

The effects of exogenous gene p53 on the chromosome of transgenic chickens were investigated. The transgenic roosters with exogenous gene p53 were used as the experimental group,and the same breed with non-transgenic roo...

Influence of Natural Convection on Measurement of Thermal Conductivity with Transient Hot Wire Method

Based on the test principle of transient hot-wire method, the air heating process of micro-wire ( Φ =0. 06 mm) was measured at horizontal and vertical positions, and the thermal conductivity of air was obtained in differ...

Energy Management Strategy of Fuel Cell and Storage Battery Hybrid Electric Tractor

In view of the problem of insufficient driving mileage of pure electric tractor, the output performance of fuel cell and storage battery was analyzed. The structural and power flow of the fuel cell/storage battery hybrid...

Optimization of Shake Flask-ferment Conditions for Bacillus Lichenniformis B. LY02 Producing Cellulase

In order to improve the production of cellulase from Bacillus lichenniformis LY02( B. LY02) strain,the shake flask-ferment conditions of cellulase produced by B. LY02 were optimized by using single factor experiments. Th...

Download PDF file
  • EP ID EP464913
  • DOI -
  • Views 79
  • Downloads 0

How To Cite

Mengmeng SUN, Keke ZHANG, Chao ZHANG, Ning MA, Huigai WANG (2018). Electromigration Microstructure and Properties of Sn2.5Ag0.7Cu0.1RE/Cu Solder Joints. 河南科技大学学报(自然科学版), 39(2), -. https://europub.co.uk./articles/-A-464913