ELECTRON TRANSFER IN THE MOLECULAR COMPLEX OF DONOR-POLYMER-ACCEPTOR
Journal Title: Analele Universitatii din Bucuresti. Chimie - Year 2009, Vol 18, Issue 1
Abstract
Electron transfer in the molecular complex donor-polymer-acceptor type was investigated. The carbon chain, which has two possible conformations (homogeneous and dimerized), was taken as polymer. The theoretical model, which described the electron transfer process in such type of the systems, was proposed. The probability of detection of the electron on the each subsequent unit, if originally was located on the first unit, was theoretically investigated. Two types of the electron transfer were revealed.
Authors and Affiliations
O. V. Yaltychenko, E. Y. Kanarovskii
Keywords
Related Articles
- EP ID EP154936
- DOI -
- Views 69
- Downloads 0
DEVELOPMENT OF A NEW ETHANOL BIOSENSOR WITH ELECTROPOLYMERISED MELDOLA BLUE AS MEDIATOR
An amperometric biosensor for ethanol was developed based on immobilization of alcohol dehydrogenase on screen-printed electrodes modified with electropolymerised Meldola Blue carried out by cyclic voltammetry in the ran...
EFFECTS OF pH VALUE ON THE ELECTRODEPOSITION OF Cu4SnS4 THIN FILMS
Copper tin sulfide thin films were electrodeposited on the indium tin oxide substrates in a bath containing CuSO4, SnCl2 and Na2S2O3 solutions. Various pH values ranging from 1.1 to 1.5 were attempted in order to determi...
FTIR AND MOLECULAR MODELING STUDY OF THE INTERACTION BETWEEN b-CYCLODEXTRIN AND POLYCHLOROBIPHENYLS
The production of polychlorobiphenyls (PCB’s) is forbidden but they are found frequently in different environmental compartment due to their high stability. In this paper the interaction between β-cyclodextrin (β-CD), a...
INCIPIENT PHASE OF THE CATALYTIC IGNITION OF LEAN n-HEPTANE-AIR MIXTURE
The incipient phase of catalytic ignition of 1.20% n-heptane-air over the surface of a heated platinum wire has been investigated at atmospheric pressure. The experimental setup allowed for ignition in isothermal conditi...
INFLUENCE OF Nd2O3 IN COPPER AND COPPER COMPOSITE COATINGS OBTAINED BY ELECTROLESS PLATING
copper and Cu/Nd2O3 composite coatings were deposited by electroless plating method using copper electrolyte alkaline solutions. Formaldehyde was used as reducing agent. Carbon steel was used as support for deposition. T...