Energy absorbers on the steel plate – rubber laminate after deformable projectile impact
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 4, Issue 7
Abstract
<p>The ability of energy absorption can be used to measure the strength of material against ballistic impact. This paper aims to analyze the rubber plated energy absorption plate that was shot with deformable projectiles. This study was conducted using numerical simulations based on the finite element that have been verified with experimental results. The simulation setting on a steel plate with different hardness with the addition of rubber thickness is prepared as a ballistic test panel. Manufacturing between layers made non fix with the back plate. Panel shot by using 5.56x 45 mm deformable caliber bullet with a distance of 15 m of normal attack angle. The finite element code with Johnson-Cook and Mooney-Rivlin elasto-plastic material models <span style="text-decoration: line-through;">was</span> were employed to perform the simulation study. Simulation results show the energy due to ballistic impact received and absorbed by the panel rises significantly shortly after the collision until reaching a certain number on a single plate where energy will decrease because the projectile successfully penetrated the plate. While on a layered plate, after the projectile succeeded in penetrating the front side plate, the absorption energy reached the maximum number and then remained constant, which caused the projectile not to be able to penetrate the next layer. These findings indicate that the addition of rubber with a layered structure is able to absorb the energy of ballistic impact</p>
Authors and Affiliations
Helmy Purwanto, Rudy Soenoko, Anindito Purnowidodo, Agus Suprapto
Keywords
Related Articles
- EP ID EP528091
- DOI 10.15587/1729-4061.2018.127345
- Views 71
- Downloads 0
Determining the patterns of phase and structural transformations at carbonthermal reduction of molybdenum concentrate
<p>We have studied patterns in the influence of O/C in the charge on the content of C, O<sub>2</sub>, and Mo in metallized molybdenum concentrate after different temperatures of thermal treatment. it was determined that...
Research into the recovery of exhaust gases from ice using an expansion machine and fuel conversion
<p>We have devised a scheme for the energy-generating unit based on the internal combustion engine 1Ch 6.8/5.4 with a spark ignition and a two-stage system for the recovery of heat from the exhaust gases. The basic eleme...
Influence of elastic characteristics of raw cotton on the mechanics of feed rollers in the cleaners from large impurities
<p>The impact of harvesting time on the quality of raw cotton, as well as on the physical-mechanical properties of the fiber, is of paramount importance, as the cotton’s maturity and content of impurities affect the qual...
Identification of the state of an object under conditions of fuzzy input data
The modernization of the methods for identification of the state of objects under conditions of fuzzy input data, described by their membership functions, was performed. The selected direction of improvement of tradition...
Conversion of N-containing compounds of flash steam condensate from carbamide production into hydrazine sulfate
<p>Formation of 1.5 m<sup>3</sup> of wastewater per 1 ton of carbamide in the form of flash steam condensate accompanies carbamide production. It is necessary to purify flash steam condensate from nitrogen compounds by t...