Energy Harvesting From Bistable Systems Under Random Excitation
Journal Title: Machine Dynamics Problems - Year 2017, Vol 41, Issue 1
Abstract
The transformation of otherwise unused vibrational energy into electric energy through the use of piezoelectric energy harvesting devices has been the subject of numerous investigations. The mechanical part of such a device is often constructed as a cantilever beam with applied piezo patches. If the harvester is designed as a linear resonator the power output relies strongly on the matching of the natural frequency of the beam and the frequency of the harvested vibration which restricts the applicability since most vibrations which are found in built environments are broad-banded or even totally random. A possible approach to overcome this restriction is the use of permanent magnets to impose a nonlinear restoring force on the beam that leads to a broader operating range due to large amplitude motions over a large range of excitation frequencies. In this paper such a system is considered introducing a refined modeling with multiple spacial ansatz functions and a refined modeling of the magnet beam interaction. The corresponding probability density function in case of random excitation is calculated by the solution of the corresponding Fokker-Planck equation and compared with results from Monte Carlo simulations. Finally some measurements of ambient excitations are discussed.
Authors and Affiliations
Lukas Lentz, Utz von Wagner
Dynamic Model for Non-Symmetric Dual-Path Gearbox
This paper presents a scheme of calculating the dynamic behavior of dual-path gearbox with non-symmetric position of two pinions in regard to gear. The influence of mesh phase and time-varying mesh stiffness of the two s...
Friction Induced Oscillations and Material Degradation in Railway Engineering
Maintenance of tracks and vehicles is an important factor for security and passenger comfort. Late and insufficient repairs may have an accelerating effect on the degradation of a railway system’s quality. In the present...
Energy Harvesting From Bistable Systems Under Random Excitation
The transformation of otherwise unused vibrational energy into electric energy through the use of piezoelectric energy harvesting devices has been the subject of numerous investigations. The mechanical part of such a dev...
Modelling and Simulation Research of the Gripper Manipulator
The paper introduces issues related to the design of the gripper manipulator. The displacement, velocity and force characteristics of the gripper manipulator have been determined. The drives of the grippers have been sel...
Evaluation of the Influence of Car Engine Power Supply With Rapeseed Oil Esters on Emission of Pollutants in Dynamic Conditions
The paper presents the test results of pollutant emissions from the compression ignition engine in dynamic driving test conditions: the New European Driving Cycle type approval test (NEDC) and the Stop and Go special tes...