ENERGYLOADING OF VARIOUS TYPES OF DISCS IN BRAKE DEVICES OF LIFTING AND TRANSPORTING MACHINES (PART ONE)
Journal Title: Проблеми тертя та зношування - Year 2017, Vol 76, Issue
Abstract
The article illustrates the comparative analysis of the features of the designs of solid and selfventilated brake discs, their materials, based on the energyloading, and also the article illustrates energy balance of the circulating in the disk cavity air flow. In this publication, the following issues are considered in relation to the problem being solved: system analysis of structures of various types of brake discs; layout diagrams of pads with overlays in relation to the radii of their location on the solid brake disc; energy balance of the air flow, washing the elements of the "filling" in the cavity of the self-ventilated disk. The purpose of the work is to justify the design features of solid and self-ventilated brake discs, based on their energyloading. We’ve estimated the energyloading of the solid and self-ventilated brake discs and we’ve outlined the ways of its reduction.
Authors and Affiliations
N. A. VOLCHENKO, A. V. VOZNYI, O. M. VUDVUD, O. B. STADNYK, V. S. VYTVYTSKYI
Keywords
Related Articles
- EP ID EP366088
- DOI -
- Views 63
- Downloads 0
A REVIEW OF STUDIES OF TITANIUM ALLOY Ti-6Al-4V SURFACE ENGINEERING METHODS
The paper reviews researches on increasing the wear resistance of double-phase titanium alloy Ti-6Al-4V. The researches were carried out for various friction conditions – pin-on-disk, point contacts, fretting wear etc. I...
EXPERIMENTAL TECHNIQUE FOR THE STUDY OF THE LOCAL DEFORMATION DAMAGE INFLUENCE ON THE FATIGUE CRACK GROWTH PROCESS
The experimental technique for the study of the local damage influence on the fatigue crack growth process is presented in the paper. The described technique aimed on the development of the new method for the prediction...
MODERN FUNCTIONAL MATERIALS FROM NANOSTRUCTURED BAINITE MATRIX AND INCREASED TRIBOLOGIE PROPERTIES
Conformities to law of forming of nanostructure matrix was investigate in wearproof high-chromium cast-irons, mechanical, physical and chemical, tribology properties are conditioned the presence of elements of nanostruct...
ENERGYLOADING OF THE FRICTION PAIRS OF THE BAND-BLOCK BRAKE DURING AIR-LIQUID COOLING IN THE DRAWWORK
The rate of descent of the drill string in the wellbore depends on their weight and the effectiveness of the mechanical and the hydrodynamic brake. In this case the main loading falls on the friction units of band-block...
WEAR OF STEEL CHROMOSALUMINIZED 12Х18N10T IN FRICTION SLIDING UNLUBRICATED
The structure, phase and chemical composition, microhardness of the surface bands are 12Х18N10T after chromoaluminizing chromoaluminizing. It is shown that the wear resistance stali 12Х18N10T in sliding friction without...