ENERGYLOADING OF VARIOUS TYPES OF DISCS IN BRAKE DEVICES OF LIFTING AND TRANSPORTING MACHINES (PART TWO)
Journal Title: Проблеми тертя та зношування - Year 2017, Vol 77, Issue
Abstract
The accident-free and safe operation of lifting and transporting machines largely depends on the reliable operation of the friction pairs of brake devices. The experience of operating has showed that the wear-friction characteristics of the friction pairs materials depend mainly on their thermal regime, and primarily on the degree of heating of the surface and near-surface layers of the friction materials. The creation of more efficient lifting and transporting ma-chines with unit capacity increase the energyloading of the friction pairs of the brake devices installed on them, which means that the heating of the elements of the friction pair increases at the same time. In this publication, the following issues are considered in relation to the problem being solved: requirements and conditions that ensure the operable state of a multi-jet ejector cooling sys-tem; design and operation of a multi-jet ejector cooling system for friction pairs of the disk brake. The aim of the work was to improve the wear-frictional properties of friction pairs of the disk brakes by reducing their energyloading.
Authors and Affiliations
D. A. VOLCHENKO, A. V. VOZNYI, M. V. KASHUBA, O. B. STADNYK, V. S. VYTVYTSKYI
Keywords
Related Articles
- EP ID EP366386
- DOI -
- Views 62
- Downloads 0
FLOW OF A SEMI-BOUNDED STREAM WITH FRICTION AND HEAT EXCHANGE IN THE NOZZLE CHANNEL OF A LIQUID ROCKET ENGINE
The ways of problem solving of determining frictional losses during cooling of a jet nozzle of a liquid rocket engine by gas-generating gas, taking into account the compressibility, non-isothermicity and gradient of the...
THE QUESTION OF THE USE OF DYNAMIC MODELS OF DISC BRAKES OF VEHICLES IN ACTUATORS OF HOIST-TRANSPORT MACHINES
A feature of modern lifting machines is the continuous improvement of their operational pa-rameters, such as payload, speed and depth of the lift, reducing the material consumption of equipment due to increased efficienc...
APPLICATION OF THE METHOD NUMERICAL SOLUTION OF DIFFERENTIAL EQUATIONS OF HIGHER ORDER IN PROBLEMS OF TRIBOLOGY
Shown method numerical solution of differential equations of high order and its capabilities in solving problems of tribology. The method is based on numerical solution of differential equations of high order, he describ...
INVESTIGATION OF FRICTION SURFACES OF WORKING ORGAN SOIL-CULTIVATING AGRICULTURAL MACHINES
The research was done of friction surface and composition of secondary structures, which formed during the abrasive wear of structural materials.
TECHNOLOGICAL ASPECTS ENSURE EFFICIENCY TOOLS WITH HIGH SPEED STEEL
It was research impact surface hardening methods of ion - plasma deposition, discrete laser treatment, chemical - heat treatment: nitriding with subsequent titannation, nitriding with sub-sequent chromingand on mechanica...