Enhanced Magnetic Squareness in Manganese-Bismuth Mechanical Alloys Incorporating Magnesium Oxide
Journal Title: Materials Science-Medžiagotyra - Year 2019, Vol 25, Issue 2
Abstract
Manganese-bismuth (MnBi) mechanical alloys have been under development for novel permanent magnets without rare-earth elements. The ball-milling of bismuth (III) oxide and manganese powders in this work leads to soft magnetic MnBi alloys with rod-like MnO impurity and highly unbalanced compositions. Interestingly, the introduction of magnesium (Mg) as reducing element during the milling gives rise to unique magnetic properties. The obtained MnBi alloys incorporating plate-like MgO has an enhanced magnetic squareness but minimal coercive field. The magnetic squareness remains high after the heat treatment and washing. The washing in ammonia also brings about a balanced composition between Mn and Bi.
Authors and Affiliations
Thanida CHAROENSUK, Chitnarong SIRISATHITKUL, Upsorn BOONYANG, Pongsakorn JANTARATANA
Keywords
Related Articles
- EP ID EP581467
- DOI 10.5755/j01.ms.25.2.19710
- Views 45
- Downloads 0
Curing Kinetics and Mechanism Research of E44/T31 Insulation Paint
Epoxy resin insulation paint was prepared with epoxy resin (E44) as binder and with proper inorganic fillers and curing agent (T31) as additives. The isothermal curing reaction process of paint was studied by the differe...
Numerical Analysis of Roles of Depletion Layer Width in Semiconductor Gas Sensor Using the Gradient-Distributed Oxygen Vacancy Model
The roles of depletion layer width in semiconductor gas sensors are quantitatively discussed based on the model of gradient-distributed oxygen vacancies. Several literatures are employed to provide experimental basis of...
Heterogeneous Nucleation Effect of N, N'-Adipic Bis(4-phenylbutyric Acid) Dihydrazide on Crystallization Process of Poly(L-lactic Acid)
Enhancing crystallization ability is a fundamental challenges in Poly(L-lactic acid) (PLLA) industry, therefore, the goal of this work was to synthesis a new organic nucleating agent N, N'-adipic bis(4-phenylbutyric acid...
Grain Growth Model of Ultra-Fine Grain AZ80 Magnesium Alloy Multi-Directionally Forged During the Isothermal Heating Process
This paper takes the ultra-fine grain AZ80 magnesium alloy multi-directionally forged as the research object. We observe its heating behavior at 673 K with an optical microscope, analyze the grain size distribution, and...
Enhancement of Mechanical Properties and Corrosion Resistance of Ultra-Fine Grain Al0.4FeCrCo1.5NiTi0.3 High-Entropy Alloy by MA and SPS Technologies
Al0.4FeCrCo1.5NiTi0.3 high-entropy alloy (HEA) was prepared by mechanical alloying (MA) and spark plasma sintering (SPS), which were evaluated in this study by XRD and TEM. After SPS, the bulk alloy exhibited a structure...