Estimation of Wear Behavior of Polyphenylene Sulphide Composites Reinforced with Glass/Carbon Fibers, Graphite and Polytetrafluoroethylene, by Pin-on-disc Test
Journal Title: Tribology in Industry - Year 2015, Vol 37, Issue 1
Abstract
Wear behavior of polyphenylene sulphide composites was investigated according to load and test speed. Two types of materials were studied: first, with 40 wt% glass fiber, and second, with 10 wt% carbon fiber, 10 wt% graphite and 10 wt%. Tribological tests were performed on the universal tribometer UMT-2, using a pin-on-disc device. The friction coefficient and wear rate for the composites were analyzed. As a result of experimental tests, it was established that polymer composite with polyphenylene sulphide matrix, carbon fibers, graphite and polytetrafluorethylene exhibit good wear behavior under operating conditions.
Authors and Affiliations
M. A. C. Besnea , D. C. Trufasu , G. Andrei , M. Bastiurea , M. S. Rodeanu
Keywords
Related Articles
- EP ID EP111248
- DOI -
- Views 96
- Downloads 0
Experimental Investigation of Friction Effect on Liner Model Rolling Bearings for Large Diameter Thrust Bearing Design
Studying friction coefficient has significant importance, especially when dealing with high load and temperature applications that have frequent starting and stopping points. Towards that, two sets of angular contact Lin...
Analyzing the Influence of the Construction Element Position on Torque Transmission by Friction
This paper is analyzing the impact of the construction element position of ship winch drum on the effects of torque transmission by friction in the mechanization welding process. The driving and driven wheels (constructi...
Investigation of Mixture of Vegetable Oil and Synthetic Esters as Environmentally Friendly Base Stock for Low-temperature Lubrication Applications
Environmental issues are of great importance in all the areas of industry and transport. Usage of environmentally friendly, easily biodegradable lubricants has a benefit, when the oil can get into environment by using to...
Comparison of PID and Fuzzy PID Controller for a Linearised Magnetic Bearing
This paper is a presentation of a linear model of a magnetic bearing and a comparison of two controllers concerning their control performance. Initially, the benefits obtained by the use of magnetic bearings in the elect...
Wear and Friction Behavior of Stir Cast Al-TiB2 Metal Matrix Composites with Various Lubricants
Al- TiB2 metal matrix composites are fabricated using stir cast method and its tribological characterization is done using three different lubricants. Tribological studies are performed in a multi-tribotester using block...