Evaluating An Electrical Discharge Machining Parameters With Using Titanium Nano Particle Mixed Dielectric Medium
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2017, Vol 5, Issue 5
Abstract
Electric discharge machining is un-conventional machining process. Electrical discharge machine is commonly used for machining for those materials which are cannot processed by conventional machining process. Electrical discharge machine parameters have a significant influence on machining characteristic like material removal rate (mmr) and tool wear rate (twr). In this paper, we compared with titanium powder and without titanium powder mixed diectric fluid used in material removal rate and tool wear rate. The piece used is inconel 718 and tool materials used brass electrode with current, pulse on time and flushing pressure was parameter.
Authors and Affiliations
D. Devendran, R. Boopathi
Keywords
Related Articles
- EP ID EP24202
- DOI -
- Views 284
- Downloads 10
Design of STATCOM for Power System Stability Improvement
This paper presents the model of a STATCOM which is controlled externally by a newly designed Power Oscillation Controller (POC) for the improvements of power system stability and damping effect of an on line power syst...
Discovery of Web User Session Clusters Using DBSCAN and Leader Clustering Techniques
The explosive growth of World Wide Web (WWW) has necessitated the development of Web personalization systems in order to understand the user preferences to dynamically serve customized content to individual users. To re...
Efficient Segmentation of Remote Sensing Images Using New Clustering Algorithm
Segmentation of real-world remote sensing images is challenging because of the large size of those data, particularly for very high resolution imagery. For segmentation of remote sensing images, many algorithms have bee...
Mechanical Properties Of As Rolled and Tempered 5SP Steel
The effect of tempering temperature and time on the mechanical properties of as – rolled 5SP steel, has been investigated. 12mm ribbed bar samples were taken out of the production batch of 10th June 2007 of the light Se...
Numerical Analysis Of Savonius Wind Rotor: A Review
this paper deals with testing of power and torque coefficient of savonius rotor using numerical analysis. Numerical analysis least costly quick time response so that it is better than experimental method. Due to poor ae...