Evaluation of Direct Esterification of Fatty Acid Derivative of Kojic Acid in Co-solvent System: A Statistical Approach
Journal Title: Journal of Chemical Engineering & Process Technology - Year 2017, Vol 8, Issue 1
Abstract
The present work deals with direct esterification method to synthesize Kojic acid using immobilized lipase as a biocatalyst in acetonitrile with the addition of dimethylsulfoxide (DMSO) as a solubilizing agent Co-solvent respectively. To increase the esterification yield of KMO, modifications of the process were evaluated, including the use of a cosolvent and the use of Novozyme 435 (Candida antarctica) as a catalyst. The KMO synthesis has been developed and optimized by using Response Surface Methodology (RSM) with Central Composite Rotatable Design (CCRD). The optimized condition of enzyme was 3.35 wt% and 1:3.64 molar ratio of kojic acid and oleic acid at 82.39°C for 255.24 min of reaction. With these condition, the maximum percentage yield was 42.73% with R2 value of 0.866914 and indicated that 86.69% of the variability in the response could be explained by the model. The model was significant and fitted well with the experimental data and the lack of fit was not significant. The efficacy for cosmetic application was successfully tested and showed as non-irritating with a Human Irritancy Equivalent score between 0.55-0.83 which safe to be applied in cosmetic ingredient.
Authors and Affiliations
Fatin Amirah Ahmad Norddin, Sharifah Nurfadhlin Afifah Syed Azhar, Siti Efliza Ashari
Technology of Obtaining Composite Sorbents for Water Purification
The article describes the main applications of biopolymer chitosan, the most important of which are medicine and food industry. In recent times, many works devoted to the application of chitosan for wastewater treatment...
Experimental and Numerical Study of Multiphase Mixing Hydrodynamics in Batch Stirred Tank Applied to Ammoniacal Thiosulphate Leaching of Gold
Hydrodynamics of aerated slurry is studied experimentally and numerically using the example of thiosulphate leaching of gold concentrate. The studied milled concentrate has shear-thinning fluid rheology and it was imitat...
Adsorptive Recovery of Gold (III) from Acidic Chloride Media Using Carbonized Microalgal Residue
Adsorption gel was prepared by carbonizing a residual waste of microalgae generated in the biofuel conversion process. The prepared gel exhibited high affinity and selectivity for Au (III) over other precious and base me...
Chemical Treatment of Petroleum Wastewater and its Effect on the Corrosion Behavior of Steel Pipelines in Sewage Networks
The sources of wastewater from municipal and different industries act as a substantial pressure on the surrounding environment, so the waste management is ordinarily required before drainage. The environmental protection...
Improved Fault Detection and Process Safety Using Multiscale Shewhart Charts
Process safety is a critical component in various process industries. Statistical process monitoring techniques were initially developed to maximize efficiency and productivity, but over the past few decades with catastr...