EVALUATION OF IMPACT SYSTEMS NOISE LEVEL IN GRAIN PRODUCTION
Journal Title: INMATEH-Agricultural Engineering - Year 2019, Vol 57, Issue 1
Abstract
Threshing of grain mass in the threshing and separating devices is one of the most «noisy» operations. The main noise sources of a working thresher are the processes of impact interaction of grain with the threshing device cover. Based on the simulation of dynamic and acoustic processes, a formula for calculating the noise level generated by the dynamic contact of free grain with the details of the thresher design, which allows planning of the organizational and technical measures to reduce noise at workplaces, was obtained.
Authors and Affiliations
S. A. Rodimtsev, Y. A. Kuznetsov, A. V. Kolomeichenko, V. V. Goncharenko, E. I. Patrin, Y. L. Mikhaylova
Keywords
Related Articles
- EP ID EP552956
- DOI -
- Views 77
- Downloads 0
INFLUENCE OF TYPES OF TRACTOR RUNNING GEARS ON THE VALUE OF HOP GARDEN ROW SPACING COMPACTION
Based on experimental research, a method of comparing areas of compaction by tractor running gears in field conditions and in hop garden row spacing was suggested. Zones of inefficient and intensive use of hop garden row...
DETERMINATION OF ROLLING RADIUS OF SELF-PROPELLED MACHINES’ WHEELS
The obtained results allow calculating the actual rolling radius of the wheel and evaluate the slipping of the drive wheels of self-propelled machines in accordance with the air pressure in the tires and the parameters o...
THE OPTIMAL CHOICE OF THE CHARACTERISTIC WAVELENGTHS IN SPECTRAL IMAGING FOR CUCUMBER DOWNY MILDEW
Aiming at the spectral image acquisition of cucumber downy mildew, the study proposed the optimal selection method of spectral imaging characteristic wavelengths combining the mean-variance analysis and analysis of varia...
MATHEMATICAL MODEL FOR STUDYING THE INFLUENCE OF TILLAGE TOOL GEOMETRY ON ENERGY CONSUMPTION
In this paper is developed a mathematical model for mechanical energy evaluation in the soil tillage process. A simple tool with plane cilindrical and cylindroidal surfaces is used in order to describe the mathematical m...
DESIGN AND RESEARCH OF AUTOMATIC ALIGNMENT TEST DEVICE OF SEMI-FEEDING PEANUT COMBINE HARVESTER
For the caused harvesting loss problem by inaccurate alignment of the semi-feeding peanut harvester, an automatic alignment system on the control core of the single chip microcomputer μPD78F0525 was designed. The system...