Evaluation of Roughened Duct with Similar Wideness Gap of Arc with Staggered Link and Comparison with Similar Rib Roughness Geometries
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 5
Abstract
This paper introduces new roughness used in roughened duct and evaluates the effective performance for wideness gap of arc with staggered link geometry. The present new roughness geometry has parameters like obstacle pitch of rib P'/P as 0.4, relative wideness of arc gap g/e as 3, ratio of arc stumble link to rib diameter (r/e) as 3 and arc angle (α) as 30o , gaps on either side of full arc as a number (Ng) of 3, rib pitch with respect to rib height (P/e) as 10 and dimensionless number of Reynolds (Re) as range of 3500 -14000. Turbulence geometries such as similar wideness gap of arc with staggered link, continuous arc rib, arc with gap rib and arc with a gap with obstacle element for rib pitch with respect to rib height (P/e) as 10 were tested. Highest factor of friction coefficient and Nusselt number is obtained to be 3.94 and 1.99 respectively for similar wideness of arc gap with stamble link. Evaluation of THP of similar wideness arc gap with stamble link roughness is higher than existing arc shaped rib element for all values of dimensionless Reynolds number with limit as 3000 to 14000.
Authors and Affiliations
Jaigopal Ambade, Dr. Atul Lanjewar
Keywords
Related Articles
- EP ID EP672314
- DOI 10.24247/ijmperdoct201990
- Views 93
- Downloads 0
CONTRIBUTION TO THE STUDY OF FLUID FLOW IN A STIRRED TANK BY INTRODUCING MICROPARTICLES
Micro particles are today a major technological and economic issue. They enable very promising innovations in many fundamental areas such as: health, energy or industry. Despite the numerous studies devoted to hydrodynam...
Investigation of Hot Corrosion Behaviour of Uncoated and WC-17co Coated Samples in Aggressive Molten Salt Environment
Hot corrosion is usually a significant issue in power plant’s boilers. The alloys and metals get corroded, once exposed to high temperature corrosion in air, or in actual boiler environment in power plants. In order to p...
CFD ANALYSIS OF CD NOZZLE AND EFFECT OF NOZZLE PRESSURE RATIO ON PRESSURE AND VELOCITY FOR SUDDENLY EXPANDED FLOWS
A numerical work was carried out to study the effectiveness of micro-jets to control base pressure in suddenly expanded two-dimensional planar duct. Two micro-jets of 1 mm orifice diameter located at 90° intervals along...
AN ELIMINATION TYPE OF POKAYOKE- A GAME CHANGER TOOL IN THE PROPELLER SHAFT ASSEMBLY
Monitoring the Industrial OEE (Overall Equipment Effectiveness) [3],[4]is now a day’s a very essential concern for optimizing the use of the resources and tracking the efficiency of the manufacturing organization. To pro...
Geomechanics of Low-Subsidence Construction during the Development of Underground Space in Large Cities and Megalopolises
The work presents the theory of the concept of low-subsidence construction of underground structures. It briefly reflects the main provisions of this concept and a set of engineering activities, which allows implementing...