Experimental Determination of the Hardness Curves in Deep Carburizing Heat Treatment
Journal Title: RECENT - Year 2013, Vol 14, Issue 40
Abstract
Was achieved an experimental research of influence of carburizing time on hardness and depth. The variation of the carbon content depth, which determines the appearance of the curve of the carbon content (carbon profiles), is revealed for SAE 3310. Determining hardness curves allows setting optimal parameters for carburizing process, eliminating hyper-carburization of the outer layer, and allows a carburizing depth up to 10 mm. After quenching, was necessary to find a solution to reduce the amount of carbon in the normal. This was done by applying an annealing diffusion treatment after carburizing into the atmosphere of carbon potential decreased. The hardness curve demonstrates the necessity of the proposed solution.
Authors and Affiliations
Sorin BARABAŞ, Adriana FOTA
Keywords
Related Articles
- EP ID EP120785
- DOI -
- Views 85
- Downloads 0
Using of Computational Modelling to Long-Fibre Composite
The article deals with using the computational modelling to long-fibre composite structures with an elastomer matrix. These structures are included into tire for transport means e.g. radial tire for passenger vehicle as...
Determination of the Thermal Expansion Coefficient for a New Type Alloy Steel
The subject of research in the present paper is the experimental determination of the thermal expansion coefficient for a definite type of steal at high temperatures. The presented methodology is proved by investigation...
A General Overview on Performant and Cost-Saving Solutions in Designing Coatings for Fuel Injection Systems
According to C. Treutler, in Europe, more than 40% of all new cars are equipped with Diesel engines, including also the high class cars. High-pressure injection systems with pressure values up to 2000 bar (200 MPa) give...
Aspects Regarding Mechanized Thermal Plasma Cutting of Metallic Materials - Carbon Steel
The purpose of this paper is to present an up to date analysis concerning the status of mechanized thermal cutting procedures, which have to be taken into account when settling the manufacturing technology in industrial...
Tracking Control of Robotic Multi-Body Systems
This paper presents a simple methodology for obtaining the entire set of continuous controllers that cause a nonlinear dynamical system to exactly track a given trajectory. The trajectory is provided as a set of algebrai...