Experimental Improvement of the Technology of Cutting of High-pressure Hoses with Metal Braid on Hand Cutting Machine
Journal Title: Український журнал із машинобудування і матеріалознавства - Year 2016, Vol 2, Issue 2
Abstract
In the article the review of the problem of improvement of technology of high pressure hoses cutting on the hand cutting machines is analyzed. Different methods of cutting of high pressure hoses into the billets are overviewed and the quality of edge cuts of hoses is analyzed. The comparison of treatment on automatic cutting machines and on hand cutting machines is carried out. Different experimental techniques of improvement of the quality of edges cutting of high pressure hoses are presented. On the basis of experimental method, a new cutting technology which consists in maximally close fixation of high pressure hoses to the cutting disc is proposed. In the basic design of the hand cutting machine, the only supports are provided, so that the cutting of the edge section of high pressure hoses causes the metal braid loosening. The proposed technology excludes the scrolling and bending of high pressure hoses during cutting, so that the loosening of metal braid is also excluded. In the paper it is shown that the scheme of distribution of cutting forces during the cutting of high pressure hoses is presented and the mathematical model of determination of normal and tangential cutting forces is formed. With a help of tensiometric table the values of components of cutting forces during free and fixed cutting of high pressure hoses were defined and their comparison was performed. As a result of the use of this technology the edges of the cut off high pressure hoses meet the necessary requirements without using of complicated technological processes.
Authors and Affiliations
Mykola Karpenko, Marijonas Bogdevicius, Olegas Prentkovskis
Keywords
Related Articles
- EP ID EP183420
- DOI -
- Views 116
- Downloads 0
Theoretical foundations for the development of experimental equipment for determining the load capacity of speed change devices
The article gives the theoretical base for construction of equipment for experimental research of static, kinematic and dynamic characteristics of devices for speed change by epicyclic gear trains with closed circuit hyd...
Applied Model of Assessment of Intensity of the Stressed Deformed State of Pipelines by Evaluation of Magnetic Anisotropy of Coercive Forces. Part 1
The problem of applied diagnostics, statistically rigorous by the proposed model analogue, running stressed-deformed state of the main (trunk) shell is studied by the method of magnetic coercimetria. The relationship bet...
Asymptotic method in investigation of complex nonlinear oscillations of elastic bodies
The main provisions of the methodology of the study of complex oscillations of elastic bodies are outlined. Its main idea is as follows: a) on the basis of empirical studies, the change of the basic parameters of some fo...
Resonant phenomena of elastic bodies that perform bending and torsion vibrations
The method of study of the influence of torsional oscillations of one-dimensional models of nonlinear elastic bodies, along which moves with a constant velocity continuous flow of inelastic homogeneous medium, into bendi...
Research of volt-ampere characteristics of the wire Pierce electron gun under electron-beam microprocessing of dielectrics
The article considers the basic energy characteristics of a wire Pierce electron-beam gun, which used for microprocessing of dielectric materials in vacuo. The aim of the work is to determine the optimal regimes of elect...