Experimental research concerning the bending of AZ31 Magnesium alloy sheets
Journal Title: Proceedings in Manufacturing Systems - Year 2017, Vol 12, Issue 3
Abstract
The tests were done using different values of blankholder forces. The values of the blankholder forces (BHF) were taken between 0 kN and 10 kN. Two forming speeds and two to five specimens were used during the tests. The obtained results were an arithmetic average of each test done on the same conditions. The following parameters of the springback effect were determined during the tests: q1 – angle between the bottom of the piece and the side wall; q2 – angle between the flange and the side wall; r – the radius of curvature of the piece wall.
Authors and Affiliations
Andrei Dragos Bors, Gheorghe Brabie, Bogdan Chirita
Keywords
Related Articles
- EP ID EP249199
- DOI -
- Views 132
- Downloads 0
SPECIAL INTERNAL WORM GEAR PAIRS WITH HELLICAL WORM
The internal worm gear pairs are special ones, which are composed by a helical worm and an internal teeth worm wheel. In the case of internal worm gear pairs, when the internal teeth worm wheel are manufactured by a wo...
CONTRIBUTIONS TO POSITIONING ACCURACY DURING LINEAR MOTION OF CNC MACHINE TOOL TABLE
New evolution of machine tools involves various elements of artificial intelligence for workpiece in the best conditions of precision and quality. High geometrical precision is the main factor in achieving performance cr...
Design of a car body part using reverse engineering and FEM
Deep drawing, as the main technology for obtaining car body parts, is one of the fields where the virtual design of parts and process is used for product development. The use of FEM in sheet metal forming processes is a...
Cloud based cutting tool load monitoring and control system
This paper presents a cloud based cutting tool load monitoring and control system for machining of functionally graded metal materials. This is a cutting tool load control system which connects the computing and service...
A new design of product label
In the first part of this study, a procedure of die-cutting the roll self adhesive labels and the worldwide situation of this procedure are presented. In the second part of this study, there is a description of the imple...