Experimental Research Regarding the Obtaining of Friction Elements
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2009, Vol 32, Issue 2
Abstract
Friction materials are used as bimetallic friction elements, consisting of a friction material layer sintered on a steel backing. Using the electron microscopy techniques (microprobe analyzer) some of the diffusion processes were investigated, at the interface friction material-steel backing, showing the important role of intermediate layers-electrodeposited copper and sintered Fe-Cu.
Authors and Affiliations
Ionel PETREA, Vasile BASLIU
Keywords
Related Articles
- EP ID EP655969
- DOI -
- Views 63
- Downloads 0
Dimensional Changes in Some Iron-Based Powder Metallurgy Alloys
The purpose of this paper is to present the dimensional changes in some ironbased (P/M) alloys. The specimens produced from atomized iron powder and alloyed powder with different sizes (< 45, 45-63, 63-100, 100-150, >150...
Research on Risk Assessment of the Workplace in an Emergency County Hospital
In hospitals crisis conditions, in Romania, it is necessary along with the implementation of a correctly medical act, applied to patients and security measures relating to the employment for staff involved. The work shal...
Some Researches on the Cutting Process Using a Stamping Device
The cutting process of the parts from the plates and strips consists in the action of two active elements of the stamping machine: device punch and active plate. The main actors on which the cutting process depends are t...
Mechanical Properties and Abrasive Wear Behavior of Fluidized-Bed Carburized Sintered Iron Alloys
This paper is a study of the influence of fluidized bed carburizing of sintered steels on the mechanical properties and the abrasive wear behavior for two different types of powder. Carburizing was carried out at a tempe...
The Influence of Different Coatings on the Graphite Degeneration in the Superficial Layer of the Iron Castings
The main objective of this experimenal reserch is to investigate new possibilities for reducing the graphite degeneration phenomenon in the superficial layer of iron castings. For the experiment, a spheroidal graphite ca...