Experimental study and response surface methodology for investigation of FSP process
Journal Title: Archive of Mechanical Engineering - Year 2014, Vol 0, Issue 4
Abstract
The article presents the effect of rotational and travelling speed and down force on the spindle torque acting on the tool in Friction Stir Processing (FSP) process. The response surface methodology (RSM) was applied to find a dependence combining the spindle torque acting on the tool with the rotational speed, travelling speed and the down force. The linear and quadratic models with interaction between parameters were used. A better fitting was achieved for a quadratic model. The studies have shown that the increase in rotational speed causes a decrease in the torque while the increase in travelling speed and down force causes an increase in the torque. The tests were conducted on casting aluminium alloy AlSi9Mg. Metallography examination has revealed that the application of FSP process results in a decrease in the porosity in the modified material and microstructure refining in the stir zone. The segregation of Si and Fe elements was evident in the parent material, while in the friction stir processed area this distribution was significantly uniform.
Authors and Affiliations
Marek Węglowski
Keywords
Related Articles
- EP ID EP167986
- DOI 10.2478/meceng-2014-0031
- Views 80
- Downloads 0
Experimental study of the temperature distribution and microstructure of plunge stage in friction stir welding process by the tool with triangle pin
Considering the developing role of the friction stir welding in manufacturing industry, a complete study on the process is necessary. Studies on each stage of the process in particular, provide a better understanding of...
Structural and thermal analysis of automotive disc brake rotor
The main purpose of this study is to analyze the thermomechanical behavior of the dry contact between the brake disc and pads during the braking phase. The simulation strategy is based on softawe ANSYS11. The modeling of...
Semi-analytical solution of functionally graded circular short hollow cylinder subject to transient thermal loading
In this paper, by using a semi-analytical solution based on multi-layered approach, the authors present the solutions of temperature, displacements, and transient thermal stresses in functionally graded circular hollow c...
Design and experimental and numerical verifications of the recirculating blower for long-term tests of turbine flowmeters
A design of the centrifugal recirculation blower as well as results of its experimental and numerical investigations are presented in this paper. The blower was designed to work in the unique test stand which is used for...
Modal measurements and model corrections of a large stroke compliant mechanism
In modelling flexure based mechanisms, generally flexures are modelled perfectly aligned and nominal values are assumed for the dimensions. To test the validity of these assumptions for a two Degrees Of Freedom (DOF) lar...