Experimental Study of Hybrid Concrete
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2016, Vol 4, Issue 3
Abstract
Since ancient time, fiber reinforced concrete has been replaced with plain concrete which is brittle material. Although, the inclusion of single type fiber may improve mechanical properties of concrete, the hybridization can compensate the disadvantages of two fiber types and represent their advantages. The effect of using steel fiber and polypropylene fiber for reinforcing the concrete to quantify the mechanical properties of concrete matrix. For this purpose, specimens of fiber reinforced concrete which contains different fibers dosage were casted. All mixes were tested on 28 days of curing, compressive strength, and flexural strength. According to the test results, the regression analysis was carried out to predict the value of compressive strength and flexural strength. The experimental results show that the hybrid form of fiber has slight effect on compressive values, while it causes increase in modulus of rupture, toughness and impact resistance values.
Authors and Affiliations
Gargee Kushwaha, Kirti Chanadraul, Manindra Kumar Singh
Keywords
Related Articles
- EP ID EP21716
- DOI -
- Views 240
- Downloads 4
Secure Data-Deduplication with Dynamic Ownership Management in Cloud Storage
In cloud storage services, de-duplication technology is commonly used to reduce the space requirements of services by eliminating redundant data and storing single copy of them. When multiple users uploads the same data...
Moses: Supporting and Enforcing Safety Environments in Predefined Context on Smartphone
Now-a-days smartphone is becoming one of the basic need because of the several exclusive features that it is providing in the form various application, storage, computational power. As a result of this, many corporate f...
A Comparative Study of the Effect of Infill Walls between the Full Infilled Frame and Partial Infilled Frame under Lateral Load
The finite element technique is used for modeling of the infill frames using the ANSYS workbench and the analysis of brickwork infilled plane frames under lateral loads. Two type infill frame modal are design such as fu...
Wavelength Division Multiplexing Optical Networks
Optical wavelength division multiplexing technology has been deployed at a very rapid rate. In this paper technical review of wavelength division multiplexing (WDM) transmission technique i.e. along with the latest deve...
Performance of Fiber Reinforced Concrete from Recycled Pet Plastic Waste- A Study Review
Concrete is a composite material consisting of various ingredients such as cement, coarse aggregate, fine aggregate and has done wonders in the construction industry. The recent use of the concrete has constrained many...