Experimental testing of a spatial furniture joint
Journal Title: Annals of WULS, Forestry and Wood Technology; Zeszyty naukowe SGGW - Year 2016, Vol 96, Issue 1
Abstract
Experimental testing of a spatial furniture joint. This article deals with experimental testing of a spatial corner joint with a non-continuous, interlocking tapered tenon with a thickness of 8 mm. This type of joint was glued with polyurethane (PUR) glue. The glue was applied to the tenon as well as the mortise, according to the manufacturer's technical data sheet. This research focused primarily on the verification of the pressure test performed on a universal testing machine. After the accuracy of this method is verified, we will experimentally test other types of joints of different sizes, shapes and two types of furniture adhesives, in future research. Beechwood (Fagus sylvatica L.) with an equilibrium moisture content of 8% was used to create the furniture joint. We evaluated the elastic stiffness of the tested furniture joint in a tensile test from the stress-strain diagram. Keywords:
Authors and Affiliations
DANIEL RUMAN, VLADIMÍR ZÁBORSKÝ, VLASTIMIL BORŮVKA, MILAN GAFF
Keywords
Related Articles
- EP ID EP362302
- DOI -
- Views 56
- Downloads 0
Portable wooden buildings at the turn of the 20th century – a historical review of structural solutions
Portable wooden buildings at the turn of the 20th century – a historical review of structural solutions. The evolving warfare at the end of 19th century gave birth to a new type of building – a portable barrack. This sol...
The impact of the drying process on the deformation of the beech and oak wood samples
The influence of the drying process conditions on the deformation of the beech and oak wood. The results of the deformation of beech wood (Fagus sylvatica L.) and oak wood (Quercusrobur) after drying process are presente...
Physical-mechanical properties of surface finish on aspen poplar wood
Physical-mechanical properties of surface finish on aspen poplar wood. The article deals with the hardness of transparent coatings and the impact resistance of the coatings on aspen poplar wood. Transparent finishes, the...
Determination of reliability of a selected cabinet furniture joint
Determination of reliability of a selected cabinet furniture joint. The paper presents the problem of determining the parameters of reliability of angle joint with confirmat screw used in the construction of cabinet furn...
Decoration of furniture inspired by human anatomy
Decoration of furniture inspired by human anatomy. Under the auspices of Groningen Museum works designer Studio Jacob, whose projects is also furniture. The collectionpresented inmuseum shows the latest pieces of work of...