Experimental Testing of Welding Saw Blade of Rib-bon
Journal Title: Analele Universitatii "Eftimie Murgu" Resita. Fascicula de Inginerie - Year 2015, Vol 22, Issue 1
Abstract
This paper presents the results of experimental electric welding with pressure butt of ribbon saw blades. The analyzes and tests carried out resulting conclusion is that this process is the best solution for the re-furbishment of these blades, provided to make a comeback heat treatment after welding.
Authors and Affiliations
Iulius Petrica, Adrian Valentin Petrica
Keywords
Related Articles
- EP ID EP449054
- DOI -
- Views 78
- Downloads 0
Design for a Sustainability of a Commercial Product: A Case Study of a Dynamic Loudspeaker
Sensitivity-based analysis carried out on the production of dynamic loudspeakers for client (A) and (B) showed that client (A) has reliability efficiency 0f 20.4% with 90% of Tp, 30%-Ep, 50%-Ecp, while client (B) has 30%...
An Investigation about using Nanorefrigerants in Air Conditioning Systems According to the Theoretical, CFD and Experimental Review of the Recent Literature
Greenhouse gases (GHG) causing global warming and climate change. In the year 2014, 32.3 billion tones CO2 emitted to the atmosphere as the most important greenhouse gas. According to the statistics, a significant portio...
A Comparative study about the Influence of Vibration on Elbow Joint Mobility
The results shown in [1] have referred to a particular appreciation of the elbow joint mobility of a subject to the action vibrations produced by a fitness device. Experiments - performed on four subjects - were held at...
Command and Running of an Experimental Model Vehicle for Covering a Labyrinth Type Runway
The paper presents the command and running of an autonomous vehicle - experimental model – for covering a labyrinth type runway. The command is realized with a Micro Arduino type platform and the running with two mini en...
Investigations into the Mechanical Properties and Microstructural Behavior of Foreign and Locally Fabricated Brake Disc
The present work reports investigations on mechanical and microstructural properties of foreign and locally fabricated brake disc. From safety point of view, brake disc is a crucial component of the braking system. Fore...