Fabrication and Analysis of Solar Powered and Peltier Model-Based Device for Desalination of Marine Water
Journal Title: International Journal of Engineering Research and Advanced Technology - Year 2017, Vol 3, Issue 7
Abstract
A solar-powered desalination system using condenser integrated with concave solar collector and centrifugal pump was developed for producing fresh water under different operational conditions. Systems temperatures added to ambient temperature were measured with hour intervals, under all experimental conditions for both solar desalination systems. Heat and mass transfer regimes were conducted for the condenser and heat exchanging tubes. Performance of the two systems was studied as a function of change in water salinity level and water tank flow rate and evaluated in terms of recorded temperatures, water productivity and cost. The experimental results may reveal that the developed system increases water productivity for all water salinities compared with the ordinary system due to the presence of centrifugal pump. The same results may also reveal that water productivity increased and cost decreased by increasing water flow rate using the developed system while the vice versa. Results obtained from two systems are analyzed for suitability of drinking by measuring the minerals.
Efficient Searching Of Cloud Data Using Multi-String Matching Algorithm
The cloud contains large volume of data that are stored by the cloud data owners. These cloud data will be encrypted by using the Symmetric Encryption Algorithm for data confidentiality. This makes searching of the docum...
Manipulative Strategies for Eminence Management and Organizational Quality in Technical Organization
In organize to be a competitor in the global market; companies must study the principal examples of quality. The key to success as identified by these examples is to recognize the importance of innovation and excellence;...
ANALYSING THE FATIGUE LIFE ON WOVEN GLASS FIBER / EPOXY POLYMER COMPOSITE LAMINATE
The impact damage and fatigue life is inter-linked in this work. The laminates were prepared by hand layup process having two different thicknesses; 2 and 4 mm. The specimens were subject to low-velocity impact at differ...
Comparative Study on Dry Sliding Wear Behaviour of Metal Matrix Hybrid Composites at Room and High Temperature Conditions
In this present study, hybrid composites was used to fabricate Boron Carbide (B4C) and Molybdenum disulfide (MoS2) particles reinforced aluminium Al2219,to achieve wettablity among Al and B4C the k2TiF6 halide salt was i...
Synthesis and Characterization of Nano-crystaline CaFe2O4 via Solution Combustion Method from Solid Waste Egg Shells as Source of Calcium
The liable application of solid egg shell waste obtained from food processing industry into biocompatible calcium ferrite nano materials will put in significance to the waste generated.Million tons of egg shell waste are...