Failure Analysis of Compression Helical Spring used in the Suspension System by FEA
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 5
Abstract
This paper is an investigation and comparison between ASTM A227 and Chromium vanadium AISI 6150 as a material in springs used in vehicles suspension systems. Numerical analysis using ANSYS 16.1 software to calculate the early failure and predict the resistance of the material and under the effect of the harmonic forces of 4250 N and 4500 N and the frequency of 100 Hz at the rate of increase 5 Hz. The results have been shown is concluded, that by using Chromium vanadium AISI 6150 would be highly durable and more efficient for use in suspension systems in the vehicles through riding on the slopes or bumped road. Also, can choose the appropriate material according to loads or weight of the vehicles and operating conditions.
Authors and Affiliations
Maher Rehaif Khudhair
Keywords
Related Articles
- EP ID EP672259
- DOI 10.24247/ijmperdoct201974
- Views 69
- Downloads 0
A Study on Manufacturing Process of Customised Doors at G9 Company in Mysuru City
In this study an attempt was made to know the different manufacturing process that is conducted in one of the reputative manufacturing company of doorways, interiors, wood way that is located in Mysore city called G9. Th...
Engine Performance and Emission Characteristics of 1-Octanol Blended Bio-Diesel in a Single Cylinder Diesel Engine
Experiments were carried out on a diesel engine operating on diesel, bio-diesel and bio-diesel blended with 1- octanol. The blended fuels are prepared with 10%, 20%, and 30% of 1-octanolby volume. The experiments were co...
A Study on the Effect of Magnetic Field on the Properties and Combustion of Hydrocarbon Fuels
Researchers all around the world are working towards possible solutions to the problems of accelerating depletion of fossil fuels, and the perennial problem of pollution associated with the combustion of such fuels. Towa...
Eliminating Wrong Spot Welding by Robots in Production Line
The main objective of our project is to reduce the false seam joints. There are many important issues, such as waiting for a lost robot, checking individual parts, unnecessary manual nutrition and increasing the cycle ti...
Hydraulic Electronic Unit Injector (HEUI) Testing Bench
This paper presents a suggested injector test bench construction, and also testing of its performance and application, because there is no device for testing the workability for this kind of injectors. Also, service deal...