Failure Analysis of Eccentric Bolt with Abnormal Rotation
Journal Title: Automobile Technology & Material - Year 2024, Vol 39, Issue 1
Abstract
After the vehicle abuse road test, the eccentric bolt connecting spring swing arm and subframe rotates mainly because the flange surface of the bolt is convex, the friction on the flange surface is uneven, and the friction coefficient does not meet the standard requirements (standard value: 0.08～016, measured value: head friction coefficient is 0.25～0.27, and the total friction coefficient is 0.18～0.20). The friction surface of flange is line contact.Compared with the surface contact, this kind of bolt has poor anti-loose and anti- rotation performance. Improve the flatness of the bolt flange surface and the uniformity of the friction surface by the following measures: reducing the step height at the hexagon connection of bolts (from 3.2～3.25 mm to 3.1～3.15 mm), increasing the hole diameter of gasket before riveting (from 13.85～13.9 mm to 14.3～14.35 mm) and making the gasket into an opposite angle before riveting (0.5°～1°). The friction coefficient of optimized bolt is qualified, and there is no abnormal rotation failure after the vehicle abuse road test.
Authors and Affiliations
Ke Shenglan, Zhang Shaofu, Zhang Xiaojun
Keywords
Related Articles
- EP ID EP731934
- DOI 10.19710/J.cnki.1003-8817.20230029
- Views 38
- Downloads 0
Application and Discussion of Automation in Automobile Wax Filling
In order to address the issue of low automation and digitalization of the automotive body wax filling process, this paper discussed feasibility of total process automation from production, inspection to repair in automo...
Research on Solving Failure Parameters of Self-Piercing Riveting Connection in Vehicle Crashworthiness Simulation
A Ls-dyna software based self-piercing riveting joint simulation method for vehicle crashworthiness analysis of was proposed in this research. Method of solving failure parameters for self- piercing riveting joint was st...
Research on the Fasten Process of Coupler Based on Automatic Spindle Equipment
In order to improve working efficiency, operation accuracy and safety, and reduce the error rate, based on the automatic spindle equipment, after the engine is connected to the gearbox, the servo motor of the spindle e...
Research on Preparation and Application of Low Volatile PA66 Composites
PA66 material has good heat resistance and is widely used in heat-resistant parts of lamps. However, because it is prone to thermo- oxidative decomposition, the small molecular substances decomposed are easy to form fog...
Analysis and Optimization of Welding Deformation on Vehicle Exhaust Pipe Flange
When the exhaust pipe is welded with the flange, the welding deformation of the flange affects the tightness of the exhaust pipe assembly. In order to avoid excessive welding deformation of flange during manufacturing,th...