Fault Analysis Using Superconducting Fault Current Limiters

Abstract

Smart grid is an advancement of the existing electrical grid. The key feature of the future smart grid is the decentralization of the main power grid into number of smaller grids (known as micro grids). Interconnection of the distributed generating (DG) sources is required with the existing electrical grid to enhance the reliability of the power system. Extensive integration of DG sources within a smart grid causes failure of a successful implementation of smart grid due to the presence of enormous fault current. Superconducting Fault Current Limiter (SFCL) has the capability to reduce the fault current level within the first cycle of the fault current resulting in an increased transient stability of the power system. In this paper an application of a resistive type SFCL, designed in Simulink / SimPower System has been proposed to limit the fault current that occurs in an interconnected power system. A resistive type SFCL model has been developed in Simulink and the performance of SFCL at different locations has been analysed in the proposed system considering wind farm (10 MVA) as a distributed generating (DG) source with the conventional power plant, to reduce the fault current in micro grids. The feasible location of the SFCL having no negative effect on the DG source has been evaluated in three phase and single line to ground faults at various positions in the smart grid.

Authors and Affiliations

Sneha Rai, Dr. Pankaj Rai

Keywords

Related Articles

Fatigue Study of Ijuk-Aren Interaction on Soil Cement Pavement Model for Elastic Foundation

This study examines the behavior of fatigue interaction-palm fibers in the soil-cement as an elastic foundation pavement. Experimental behavior in sandy-clay type soil stabilized cement, with 6% and the amount of cement...

Anticorrosive Activity of Rosemarinus officinalis L. Leaves Extract Against Mild Steel in Dilute Hydrochloric Acid

The rosemary (Rosemarinus officialis L) leaves extract was evaluated for inhibitive action towards the corrosion of mild steel in 0.1 N HCl at ambient temperature by gravimetric and potential monitoring techniques. There...

ENGINE BATTERY HYPER- CHARGING FOR HYBRID CARS

In I.C Engines, the excess heat during the power stroke plays a vital role. Many new concepts are generated to cool the engine. This paper deals with usage of Excess heat from the cylinder of any engine there-by generati...

A Novel Approach for Precise Motion Artefact Detection in Photoplethysmograph Signal Processing based on Dark

PPG signal is a useful tool for quick and critical diagnosis related to cardiovascular output via wearable or portable devices. Its drawback is unreliable during non-stationary states due to occurrences of frequency over...

COMPARATIVE STUDY OF PAPR REDUCTION ON SPECTRUM AND ENERGY EFFICIENCIES USING CLIPPING AND FILTERING TECHNIQUE AND PARTIAL TRANSMIT SEQUENCE TECHNIQUE IN OFDM SYSTEM

In this paper an economical study is done among simple clipping and filtering procedures and partial transmit sequence procedure, and proved that spectrum and energy efficiency is much better in comparative with the part...

Download PDF file
  • EP ID EP180347
  • DOI -
  • Views 224
  • Downloads 0

How To Cite

Sneha Rai, Dr. Pankaj Rai (2016). Fault Analysis Using Superconducting Fault Current Limiters. International Journal of Innovative Research in Advanced Engineering, 0(0), 72-80. https://europub.co.uk./articles/-A-180347