Fault Tolerance Analysis of Modified Irregular Augmented Shuffle Exchange Network (MIASEN)
Journal Title: International Journal of engineering Research and Applications - Year 2017, Vol 7, Issue 7
Abstract
Multistage Interconnection Networks (MINs) play a vivacious position to perform high performance within the discipline of VLSI, broadband communications, parallel and distributed systems designs. The problem of fault tolerance and cost effectiveness are the predominant challenges for calculating the overall performance of MINs. A MIN is better fault tolerant, if it may deal with the extra faults come across in different stages. The fault tolerance of proposed Modified Irregular Augmented Shuffle Exchange Network (MIASEN) [13] is examined in terms of bandwidth, processor utilization, throughput, probability of acceptance, and processing power. The performance and evaluation analysis indicates that the MIASEN is more fault tolerant than the existing Modified Alpha Network (MALN).
Authors and Affiliations
Shobha Arya, Nipur Singh
Keywords
Related Articles
- EP ID EP391878
- DOI 10.9790/9622-0707080105.
- Views 100
- Downloads 0
Design And Analysis of A Compact Slotted Patch antenna with Enhanced Bandwidth and Harmonic Suppression for WLAN Applications
A single-layer a compact microstrip-fed Slotted patch antenna with capabilities of both bandwidth enhancement and harmonic suppression is proposed. For this purpose, a pair of λ/4 microstripline resonators is introduced...
Design and Implementation of Area Optimized, Low Complexity CMOS 32nm Technology Based NCO
A numerically controlled oscillator (NCO) is a digital signal generator which is a very important block in many Digital Communication Systems such as Software Defined Radios, Digital Radio set and Modems, Down/Up convert...
New Orthogonal Codes for Direct Sequence CDMA Communications
From a long period Walsh codes and Gold codes have been used as a spread spectrum codes in Code Division Multiple Access (CDMA) communications because of their ease of generation than the efficiency of these codes. Drawb...
The Flame-Retardant Performances of Blending Fabrics of Flame-Retardant Viscose and Nylon 6, 6 Fiber with Different Blending Ratio
In this article the fire-retardant viscose and the nylon 6, 6 fibers were used to produce blends and wove the flame-resistant fabrics with different blending ratios, then tested and analyzed the flame-resistant performan...
Performance and Emission of a Diesel Engine Fueled by Diesel and Biodiesel Blends with Antioxidant Additives and Their Emulsions
This study is aimed at presenting a new type of antioxidant 2,6-Di-tert-butyl-4-methoxyphenol (DBMP), blended with B20 and B100 and their water emulsions (2.5% and 5%), to produce an emulsified fuel for diesel engines. T...