Feasibility Study on Flexible Building (G+2)

Abstract

A good design teaching environment requires good utilization of all the space available which can move very often be improved and made some flexible by the incorporation of some type of movable partition wall, day by day population increases it lead to lack of space and increases in the rates of the plots, flats etc . We aware of the thing that, traditional flat system has fixed walls but if we required more space in flat we cannot make it happen due to fixed walls but we come here with the solution at it by introducing installing flexible partition walls. In this arrangement, we can move the wall between hall and gallery towards the end gallery whenever we need so and can increase the carpet area. When there is no need of space and we can again maintain the wall at the original position. Similarly, we can move the wall between Hall and Kitchen by we make Dining +Hall. There we can move this wall towards Kitchen and achieve or objective. Also we can extend the size at the bedroom, as per the planning requirement and owner choice due to this project space utilization can be effectively done Here, we should note one point one point that most of the time for kitchen we need more space or less too, but due to the moving flexible partition wall we can arrange dimension of kitchen as per the requirement. Also we required more space in hall during the season of festivals or some kind of parties Celebration this can be achieved by moving flexible partition wall.

Authors and Affiliations

Yashwant Bundele, Tushar Salunkhe

Keywords

Related Articles

Gas Monitoring Using GSM

Gas monitoring system is used to detect any leakage of LPG/CNG, in small scale factories or in home appliances also. It will detect the leakage of dangerous gas and alarm the user. This unit can be easily incorporated i...

Design of A Moving Message Dot-Matrix Display Using At89c52 Microcontroller and Decoders

The technique and design of a moving message display DOT-Matrix, used in displaying information to the general public electronically was discussed in this article. In this design a highly efficient microcontroller was u...

Robust Brain MRI Segmentation for 3D Printing Applications

In this paper, we introduced a technique for efficient simulation, Optimization, and Replication of patient specific procedures and prosthetics for neurosurgery applications the recent advances in computing power and ad...

A Study on Comparative Analysis in Retail Industry with Special Reference to Kalessuwari Refinery Pvt.Ltd

The project has been undertaken with a view to study the comparative analysis in retail industry. This study is intended to help Kalessuwari to achieve competitive advantages among other competitors. Major domestic play...

Effect of Skew Angle on the Behaviour of Skew Slab under Uniformly Distributed Load

Slab is an extensively used structural element which usually carries uniformly distributed gravity loads. Out of different shapes of slabs, rectangular and skew slabs have quite a good number of applications in modern c...

Download PDF file
  • EP ID EP23721
  • DOI http://doi.org/10.22214/ijraset.2017.4014
  • Views 323
  • Downloads 7

How To Cite

Yashwant Bundele, Tushar Salunkhe (2017). Feasibility Study on Flexible Building (G+2). International Journal for Research in Applied Science and Engineering Technology (IJRASET), 5(4), -. https://europub.co.uk./articles/-A-23721