Features of formation of microwave GaAs structures on homo and hetero-transitions for the sub-microconnection of the lsic structures
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2019, Vol 1, Issue 5
Abstract
<p>The features of the formation of microwave GaAs structures are considered and a set of studies is carried out to create a serial technology of large-scale integrated circuit structures (LSIC), including the number of microwaves on GaAs epitaxial layers deposited on monosilicon substrates.</p><p>The conditions for the formation of a two-dimensional electron gas in hetero-structures with the determination of electron mobility depending on the orientation of the surface were investigated. For hetero-structures on the surface of a semi-insulated GaAs substrate rotated from the plane (100) at an angle of 6–10º with oxygen content on the initial surface С<sub>0</sub>=10–50 % relative to the gallium peak of the Auger spectrum, a strong mobility anisotropy was found due to an increase in the angle of reorientation and incomplete annealing of carbon from the initial surface of the GaAs substrate.</p><p>For the deposited layers of gallium arsenide on monosilicon substrates epitaxial technology is used, which can significantly improve the purity of the obtained material, namely, significantly reduce the level of oxygen and carbon isoconcentration impurities, which strongly affect the charge state of the interface.</p><p>For the formation of structural layers on GaAs, the technology for the formation of nitride layers of Si<sub>3</sub>N<sub>4</sub>, AlN, BN by the magnetron method at low substrate temperatures and a given stoichiometry was developed and investigated. The combination of gallium epitaxial nano-silicon arsenide technology to silicon substrates became realistically possible only with the development of technology of magnetron precipitated buffer layers of germanium.</p>The technology of the formation of logical elements NOT, OR-NOT, AND-NOT of high speed with low threshold voltage is developed, which allows to build high-speed chips of combination and sequential types on complementary structures
Authors and Affiliations
Stepan Novosiadlyi, Volodymyr Gryga, Bogdan Dzundza, Sviatoslav Novosiadlyi, Halyna Klym, Omelian Poplavskyi
Keywords
Related Articles
- EP ID EP666183
- DOI 10.15587/1729-4061.2019.157212
- Views 68
- Downloads 0
Study into formation of nutritional value of cauliflower depending on the agribiological factors
<p class="a">We studied the effect of the sum of active temperatures above 10 °C, the amount of precipitation, and the hydrothermal coefficient (HTC), on the formation of dry, dry soluble substances, sugars, and ascorbic...
Determination of the enzyme destruction rational mode of biomass autolysate of lactic acid bacteria
<p>It is shown that the degradation products of peptidoglycans of lactic acid bacteria cell walls that are related to the muramyl peptide series compounds are promising components of food ingredients and dietary suppleme...
Development of the information system for forecasting collision between birds and wind farms
<p>The information system for processing the results of observations of birds on the territory of a wind farm was created. The information system ensures the storage and processing of the monitoring results, conducting s...
Stability of structural elements of special lifting mechanisms in the form of circular arches
<p>The system of differential equations of stability of circular arches with symmetric sections and the sixth-order resolving ordinary differential equation are derived. It is noted that these equations have variable coe...
Analysis of the technology to manufacture a high-temperature microstrip superconductive device for the electromagnetic protection of receivers
<span lang="EN-US">Technological features of the process of manufacturing a high-speed high-temperature superconducting microstrip protective device which can reduce in a picosecond period (the time of switching or opera...