FEATURES OF THE INTERACTION OF THE TRACK AND THE ROLLING STOCK WITH THE PRESENCE OF INITIAL ROUGHNESS ON THE SURFACE OF THE ROLLING OF RAILS
Journal Title: Збірник наукових праць Українського державного університету залізничного транспорту - Year 2018, Vol 178, Issue 12
Abstract
The article deals with issues related to the interaction of the railway track and rolling stock. In particular, as a computational scheme of the railway track, it is proposed to use a scheme in which the rails are supported by separate supports that have nonlinear elastic-dissipative characteristics, which, according to the authors, most accurately describes the power processes in the "carriage-track" system. Since the originally proposed design scheme was supposed to be used for operational conditions of railways of industrial transport, its preliminary adaptation was carried out, taking into account the structural features of the rolling stock of the main railway lines of "Ukrzaliznytsya". Based on the prospects for introducing high-speed traffic in certain sections of the regional branches of "Ukrzaliznytsya", in addition to the main factors affecting the overall stress state of the railway track, the initial roughnesses on the rolling surface of rails are introduced into the calculation models. The comparative analysis of the requirements for the straightness of rails of domestic and foreign production, showed significant differences, both in terms of the tolerances allowed, and in approaches to controlling this indicator. This allowed, modeling the most unsuccessful combinations of irregularities along the entire length, as well as at the end sections, to carry out multivariate calculations to determine the vertical forces, depending on the magnitude of the initial unevenness on the rolling surface of the rails. The rails of domestic production and foreign were taken as settlement ones. The results of the calculations show the undoubted influence of the magnitude of the factory roughness on the surface of the rolling of rails on the level of vertical forces. The level of these forces is higher (with other things being equal) on the rails of Ukrainian production.
Authors and Affiliations
Alexander Darenskiy, Vladimir Vitolberg, Dmitry Potapov, Pavlo Storchay, Dmitro Dudikov
Keywords
Related Articles
- EP ID EP381196
- DOI 10.18664/1994-7852. 178.2018.138960
- Views 57
- Downloads 0
JOINT SHAPE AND SEAM WIDTH INFLUENCE ON THE REINFORCED CONCRETE STRUCTURES CONNECTION BEARING CAPACITY IN TRANSPORT CONSTRUCTION
The reinforced concrete elements keyed joins three series experimental research results are presented. In the first series, one-keyed contact joints with rectangular, trapezoidal and triangular keys were investigated wit...
MULTIPARAMETRIC OPTIMIZATION OF THE COMPOSITION OF PAPERCRETE
In the article provides a brief overview of the specific features of cellulose-containing aggregates of plant origin. The degree of influence of these features of cellulose-containing aggregates of plant origin on the pr...
REVIEW OF METHODS OF TECHNICAL MELIORATION OF SOILS USED IN ROAD CONSTRUCTION
The development of transport infrastructure is a process of constant and necessary to ensure the growth of economy any country. He undoubtedly entails a rise in the number of used transport and consequently an increase i...
MODEL OF MUTUALLY DEPENDENT TRANSPORT FLOWS TRAFIC CONTROL ON INDUSTRIAL RAILWAY TRANSPORT
Issues related to the optimal control of interdependent traffic flows during the dispatching centralization of industrial railway transport facilities are investigated. The problem of the intellectual and analytical supp...
ANALYSIS OF SCHEME OF COMPENSATION OF REACTIVE POWER IN THE SYSTEM OF TRACTION POWER SUPPLY
The article analyzes the existing methods and systems of reactive power compensation in the traction power supply system. The problem of reactive power compensation has always occupied an important place in shaping the e...