Finite Element Analysis of Bus Rollover Test in Accordance with UN ECE R66 Standard
Journal Title: Journal of Engineering and Technological Sciences - Year 2017, Vol 49, Issue 6
Abstract
Bus transportation plays a significant role in short and long distance mass transportation in Indonesia. The number of buses in Indonesia shows significant growth every year. However, there is a lack of regulations regarding bus construction safety and the increasing number of bus accidents is also becoming a major concern. In this paper, a computer simulation of bus rollover is presented. The bus structure was modeled to represent the mass distribution in a real bus. Two conditions were tested: the bus when empty and when fully loaded. Both the empty bus and fully loaded bus simulation results show that the bus did not comply with the UN ECE R66 safety standard. The results were validated by making a comparison with other tests that have been conducted by other researchers.
Authors and Affiliations
Satrio Wicaksono
Study of Micro-hardness of High-Speed W9Mo4Co8 Steel Plates in Pendulum Grinding by Abrasive Wheel Periphery
In cutting tool assembly, grinding is the most important technological step of the finishing treatment, largely determining the workmanship. An increase of micro-hardness after grinding relative to the original one indic...
Application of Fin System on Adsorption of Methylene Blue Dye using Adsorbent Coating Layer: Mathematical Formulae
Dye solution treatment using a fin system is a new adsorption treatment technique that can replace expensive conventional adsorption treatment units that are currently mostly used in industry. The fins function as the me...
An Optimized Method for Terrain Reconstruction Based on Descent Images
An optimization method is proposed to perform high-accuracy terrain reconstruction of the landing area of Chang’e III. First, feature matching is conducted using geometric model constraints. Then, the initial terrain is...
Treatment Optimization of Electrocoagulation (EC) in Purifying Palm Oil Mill Effluents (POMEs)
Palm oil mill effluents (POMEs) can contaminate soil, groundwater, and also the water environment. The increasing production of crude palm oil in Indonesia produces an enormous amount of POME waste. Therefore, a method i...
Pervaporation of Acetic Acid-Water Mixture Using Silica Membrane Prepared by Sol-Gel Method
Silica membranes were developed and tested for the separation of acetic acid and water by pervaporation. Thin microporous silica membranes were prepared on a porous alumina tube by sol-gel method using tetraethyl orthosi...