Finite Element analysis of the induction cooker electromagnetic field distribution
Journal Title: Вісник Національного технічного університету "ХПІ". Серія: Проблеми удосконалювання електричних машин і апаратів. Теорія і практика - Year 2016, Vol 32, Issue 1204
Abstract
Using EleFAnT2D code developed at the Institute for Fundamentals and Theory in Electrical Engineering, Graz University of Technology, Graz, Austria computer modeling of electromagnetic processes in various designs of induction cookers is carried out. Electromagnetic field calculation is carried out in 2D formulation by the Finite Element Method using a magnetic vector potential. Influence of a number of factors (geometry of the inductor system, frequency of current in the inductor) on the electromagnetic field and eddy current distributions in the induction cookers’ structural parts and dishes is investigated. Results of engineering calculation of various induction cookers’ inductors by the technique proposed earlier are corrected.
Authors and Affiliations
M. G. Pantelyat, Yu. V. Gurentsov
Keywords
Related Articles
- EP ID EP408692
- DOI -
- Views 120
- Downloads 0
Improving the energy performance of the electric traction drive for tram with DC motor with series excitation
Most part of the tram park of Ukraine uses energy-intensive traction electric drive with DC motors with series excitation with rheostat control. The purpose of work is development circuit design of the traction unit on t...
An analysis of transient modes of a switch reluctance motor at operation in regime of starting
The question of analysis of influence of law of change of control parameters on the character of transients in the mode of starting of a Swithed Reluctanse Motor of a miner electric locomotive by means of models develope...
Short circuit radio fuses for 110-150 kV overhead electrical power networks
The article is dedicated to improving reliability of electric networks with voltage 110-150 kV by application developed special devices latch short circuit. It is proposed on the basis of the developed device of an elect...
Development and research of system of automatic control of electric traction
Were developed by structural schemes of automatic control system of traction electric drive based on a synchronous motor with permanent magnets, the use of which allows you to control the motion of electric contact locom...
A fe technique for induction cooker and heated dishes thermal state computer simulation
In the paper a technique for the numerical analysis of the induction cooker main structural parts and heated dishes thermal field is proposed. The mathematical model of the temperature field distribution in structures un...